This is an old revision of the document!

Configuring Gargoyle

Getting Started

Getting Started With Gargoyle
A few pointers to help you get started using Gargoyle once it is installed.
Configuring Routers With A Single Ethernet Port
Some wireless routers (e.g. MR3201A, Fonera2200) have only one ethernet port. This guide explains how to configure Gargoyle on these routers.

Basic
Basic Device Configuration
- Client+AP mode
  Client + AP mode is sending and receiving through wireless
- 3g/UMTS USB Dongle
  Using a USB 3g/UMTS-modem for WAN connection to the internet.
DHCP
DHCP server and Static IPs
OpenVPN
OpenVPN Configuration for remote access
- router to router
  OpenVPN router to router access
Dynamic DNS
Updating in real time of Internet Domain Name System (DNS) name servers
Tor
Protect your privacy. Defend yourself against network surveillance and traffic analysis.
Routing
Active and static routes
Wake on LAN
Allows a computer to be turned on or woken up by a network message

Configuring Routers for bandwidth Sharing
This guide explains how to configure bandwidth sharing on Gargoyle routers.
Port Forwarding
Forward Ports from the WAN interface on the router to hosts on the local network (LAN), and configure UPnP
Restrictions
Limit what hosts on your local network can access
Quotas
Set Bandwidth Quotas for hosts on your local network
Quality of Service (QOS)
Quality of Service

Theme manager
Theme manager for the Gargoyle router
Extending RAM via file SWAP
When activated the SWAP partition on the USB drive will be mounted automatically
Router access with SSH
CLI (command-line interface) access via SSH