Need Help With ACC QoS

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
Diz
Posts: 18
Joined: Fri Dec 02, 2016 5:27 pm
Contact:

Need Help With ACC QoS

Post by Diz »

So I play Online CoD and i want to keep a consistent lowest ping possible, and i was wondering what do i put as, "Manual control target ping time." Would i put it around the same ping as "Ping" which would be around 26, or Would it be based around "Filtered Ping", and/or would it be "Ping Time Limit" which is 67. Also What do the numbers in the brackets: [40/67] mean? Thanks for your help in advance! :) Here is a screenshot of my current ACC Settings: https://gyazo.com/3e78cf9976b9203e354249ba243c4b1e
Linksys WRT1200ac on 1.9.X

Diz
Posts: 18
Joined: Fri Dec 02, 2016 5:27 pm
Contact:

Re: Need Help With ACC QoS

Post by Diz »

Btw I only have a 3.2 Download and 600kbps Upload speed. I get a consistent low ping currently. But occasionally i get ping spikes.
Linksys WRT1200ac on 1.9.X

Lantis
Moderator
Posts: 7065
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Need Help With ACC QoS

Post by Lantis »

You shouldn't use manual ping target.
Let the algorithm figure out what your connection can reliably sustain. Yours will be higher than 26.

This documentation is where you should start.
https://www.gargoyle-router.com/wiki/doku.php?id=qos
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply