Gargoyle 1.5.x Series

Changelog

1.5.11 Attitude Adjustment 12.09 Final SVN r38347
1.5.10 Attitude Adjustment 12.09 Final
1.5.9 Attitude Adjustment RC-1
1.5.8 Attitude Adjustment 12.09-beta-2
1.5.7 Attitude Adjustment 12.09-beta
1.5.6
1.5.5
1.5.4
1.5.3
1.5.2 Backfire 10.03.1
1.5.1 Backfire 10.03.1-rc6
1.5.0 Backfire 10.03.1-rc5

v1.5.11 (Tue Oct 15, 2013)

New in 1.5.11:

Support for multiple languages and translations (“i18n support”)
Relatively complete support for English, Polish, Russian, Spanish and Chinese languages
Minimal support for Portugese and Arabic languages (these translations still need a lot of work)
Minidlna media server included on routers with at least 64M of memory and at least 16M of flash
Webcam support for routers with at least 64M of memory and at least 16M of flash
Fixes installation of kernel module packages via gpkg
Tor can now be configured to save files to a USB drive instead of storing everything in memory
Tor removed from binaries for smaller router with less than 64M of memory or less than 16M of flash
Tor version updated 0.2.4.17-rc
PPTP plugin now available
Update OpenWRT Attitude Adjustment branch code to SVN r38347 to include latest wireless fixes
Two new themes available: Horchata and Dementoid
Updated to use latest version of dropbear SSH server
Add favicon to webui

v1.5.10 (Tue May 21, 2013)

New in 1.5.10:

OpenWrt updated to final version of Attitude Adjustment
New backend plugin manager, gpkg
New plugins wifi-schedule (thanks BashfulBladder), logread and webshell
OpenVPN server bugfixes
Support for Tp-Link MR3220 v2 and MR34220 v2
Fixes for 3g usb wireless support
Multiple improvements to QoS
Updated tor and miniupnp to latest versions
Display switch information indicating witch lan ports are up and connected on overview page
Some optimization of image files to save space
Fixed some file permissions issues with ftp access to usb storage
Numerous typo/cosmetic fixes

v1.5.9 (Fri Jan 04, 2013)

New in 1.5.9:

New Plugin Interface (System/Plugins)
Bump OpenWrt version to Attitude Adjustment RC-1
Multiple minor fixes for usb-storage implementation
Fixes bug that can (sometimes) cause bandwidth monitor to reset if network restarts
Fixes bug in bandwidth monitor display that can cause a single month to show up multiple times after a time-zone change
Fixes bug in OpenVpn client mode when configured to use TCP

v1.5.8 (Wed Oct 24, 2012)

New in 1.5.8:

USB Storage Section now supports sharing files via FTP
USB Storage Section now supports sharing a subdirectory on a drive instead of the whole drive
USB Storage Section now supports configuration of multiple users
Fixes 3G Support (broken in 1.5.7)
Fixes use of non-standard DNS servers (broken in 1.5.7)
Fixes printer sharing (broken in 1.5.7)
Fixes bug from blocking of MAC addresses assigned a static IP that connect from a different IP, when appropriate setting is checked
New Dynamic DNS services: no-ip.pl and dtdns.com (Thanks to Cezary Jackiewicz for this patch)
Fixes bug preventing NTP daemon from starting properly after time settings are saved (Thanks to Chris Nesbit for this patch)
Fixes Display of DNS servers in overview section
Display router hardware model in overview section
OpenWrt version upgraded to Attitude Adjustment Beta 2 (1.5.7 was based on Beta 1)

v1.5.7 (Sep 20, 2012)

New in 1.5.7:

Underlying OpenWRT upgraded to newer “Attitude Adjustment” Branch
Significantly improved hardware support
Fix handling of direction property of OpenVPN tls-auth
Allow building of only one profile for a given architecture by running e.g. “make ar71xx.usb_large” to build usb_large profile instead of all ar71xx profiles

v1.5.6 (Jul 27, 2012)

Numerous bug-fixes for OpenVPN including fix for bug preventing server from activating if any port-forwards are active.
New Status/OpenVPN section for displaying hosts connected to OpenVPN server
Option to track total OpenVPN bandwidth in Status/Bandwidth section
Configure Server with OpenVPN TLS-Auth key, for additional security, and allow setting of TLS-Auth in OpenVPN Config controls
Include .ovpn file (which is identical in all but name to .conf file) in OpenVPN client configuration zip files, for better interaction with Windows Client
Inform user if saving a OpenVPN client config that expects different subnet than what router has configured, and give user the option to automatically switch subnets to the new one.
Bump Tor to 0.2.3.19-rc, and fix bug causing Tor bandwidth to be double-counted
Special build for D-Link DIR-825-b1, without Tor. While this router has 8MB of flash, layout is such that not all of it can't be used, and including Tor exceeds maximum.
Fix necessary time settings ayutomatically when upgrading from versions ⇐ 1.5.5 and preserving settings
Make sure new ntpd daemon gets built on Alix systems

v1.5.5 (Jun 26, 2012)

OpenVPN GUI for routers with 8MB+ flash and 32MB+ memory
Fixes several major bugs that can prevent Tor from starting when router is rebooted
Improved UPNP GUI in port forwarding section
Several performance improvements/tweaks for QoS were added
Fixes bug in code for starting Tor on a per-IP basis
A bug in code for forcing use of router DNS servers was corrected
Downloading of bandwidth csv file should now work correctly
Moved from using old 3rd party NTP time synchronization utility to busybox NTP utility
Fixes a bug that can prevent write access to shared CIFS drives
Add dynamic dns provider joker.com
Fixes a bug in usb disk formatting code when volume numbers are non-sequential
Fixes a bug preventing more than one MAC address from being blocked under the Static IP section of the DHCP screen

v1.5.4 (Mar 01, 2012)

Bumps OpenWrt version to latest Backfire version for latest wireless fixes and support of multiple switch models in Buffalo WZR-HP-G300NH routers
New improved version of Active Congestion Controller.
Implements ability to configure router as a Tor Relay/Bridge including ability to configure an Obfsproxy bridge (for routers that support Tor)
Implements ability to connect to Tor bridge (including Obfsproxy bridge) instead of directly to a relay (for routers that support Tor)
Allows monitoring of total Tor Bandwidth usage (for routers that support Tor)
Allows access to Tor hidden service addresses from all hosts (toggled and untoggled) when Tor is active and separately toggled for each host (for routers that support Tor)
Allows monitoring of bandwidth to/from router itself, which was before included in the “Total” categories, but not recorded seperately
Option to attempt to save configuration when upgrading. Some versions may still be incompatible.
Fixes monitoring of web history/searches for ranges of IPs
Some fixes for mounting/formatting of USB drives
Fixes security issue – bandwidth.csv is no longer visible if not logged in
Adds two new optional date formats: dd.mm.yy and yyyy-mm-dd
Enable ps wide output in busybox – allows more accurate listing of running processes when logged in via SSH
Sets cron loglevel to 9 so syslog doesn't show every time a cronjob runs (which can quickly clutter up the system log)

v1.5.3 (Feb 03, 2012)

More wireless fixes, bump OpenWrt to latest Backfire version
Implements ability to format USB disk with swap / ext4 in web interface
Fix bug causing USB Storage plugin to handle ext3 and ext2 drives incorrectly
Implement ability to access TOR Hidden Services
Fix bug causing TOR to leak DNS requests
Add Tor, USB Storage and USB Printer plugins to Alix build
Add selfhost.de dynamic dns service
Update theme by Matei to latest version

v1.5.2 (Dec 27, 2011)

Fixes bug causing router crash when installing packages via opkg
Allows selection of several DNS server options, including OpenDNS and Google DNS servers from a dropdown without the need to enter IPs manually
Enables resolution of NameCoin and OpenNIC alternate root domains by default
Automatically mounts swap partitions on attached USB drives
Tor is disabled on routers with less than 64MB of memory (including swap space)
Fixes error in updating namecheap.com domains via dynamic DNS
Some improvements in looking up host IP for dynamic DNS – rotating pool of servers for lookups is now used
Bumps OpenWrt Backfire version to 10.03.1 final
Time initialized to be Jan 1st, 2001 instead of 1970 before NTP started, so timezone shift never puts it before unix epoch
QoS accounting improved for PPPoE connections which will improve overall QoS performance on these systems.

v1.5.1 (Dec 05, 2011)

Increments OpenWrt Backfire version to include latest wireless driver fixes
3G wireless connection now configurable on routers with USB port when a 3G modem is plugged in
USB Printer configuration
Tor anonymizer configuration for ar71xx routers with memory >= 32MB and >=8MB of flash space (see here for more info on Tor)
Implements user defined ping limits to QoS congestion controller
5GHz and 2.4GHz SSIDS displayed seperately on overview page
Fixes bug causing dyanmic DNS daemon not to update properly
Fixes bug preventing freedns.afraid.org dynamic DNS updates on some platforms
Revert to simpler OpenDNS configuration settings, should be less confusing and should work now
Set freedns.afraid.org as default dynamic DNS provider (top of list)
Add images for Netgear WNDR3800, TP-Link WR740N and MR3420

v1.5.0 (Oct 25, 2011)

5GHz wireless client and wireless bridge modes can now be used on dual band routers
Enables scanning of 5GHz Channels on dual band routers
Separate channel width controls for each band on dual band routers
Compressed javascript for smaller final image sizes
QoS connection bytes now measured in KB, not MB
Fixes Wired-Dhcp mode on single port router such as Gargoyle Pocket Router (MR3201A)
Fixes dnsomatic.com dynamic DNS configuration and adds gratisdns.dk dynamic DNS configuration (thanks to Thomas Markussen)
Fixes “Monitor Only” option in web usage monitor
Fixes bug that can cause a crash when restarting web usage monitor
Add Poland to UTC+1 timezone list
Rename field for labeling port forwarding rules from “Application” to “Description”, allowing longer descriptions than 10 characters
Update httpd_gargoyle to do a better job of preventing page caching
Fixes erroneous display of errors in httpd_gargoyle startup
Increments OpenWrt Backfire version to include latest wireless driver fixes