Gargoyle 1.3.x Series

When 40MHz channel width is selected, channels are limited to those that work with wider channel width (Thanks to Cezary for this contribution!)
Max transmit power is now determined dynamically for mac80211 wireless interfaces, and may be dependent on channel selected
Separate controls for transmit power in 5GHz and 2.4GHz bands in dual band routers
Fixes bandwidth monitor display bug for 30 day time point that can occur when router is first flashed

Fixes connected host display
Some fixes for QoS display (upload display should now work)
Some fixes for connection display
Fixes issues with TP-Link 741ND introduced in 1.3.14 (due to a bug in underlying OpenWrt code)

Fix display of bandwidth monitor page in chrome
Fixes for UPNP
Fixed port forwarding when DMZ active
Fix for mounting USB drives, when unmountable partitions exist on the same drive
Added option to USB storage (on supported models) to specify whether to share only specific drive, or any attached drive
Fixes for setting static routes that apply to any destination IP, and setting default route
Reset and reboot buttons now work on D-link DIR-825b and Buffalo WZR HP-G300NH

More bandwidth module fixes, should further increase stability
On dual band routers, wireless hosts connected to 5GHz SSID now show up in the wireless section of Connected Hosts
Bumps underlying OpenWrt Backfire version, allowing WNDR3700v2 support
Fixes support for TP-Link WR-941NDv3 and other routers that use the same switch configuration
Fixes bug causing incorrect display of DHCP Lease Expiration times in Connection/Basic section

Implement custom SSID for 5Ghz band in dual band routers (instead of just appending _5Ghz to 2.4 Ghz SSID)
WAN speed improvements (due to optimization of bandwidth module, max speed of 107Mbit/s measured on a TP-Link TL-WR1043ND)
Fixes bug in bandwidth module that may be responsible for zeroing of last time point (due to extremely intermittent nature of original issue this isn't a 100% certain fix for the problem)
Removes all openwrt rdate functionality so that NTP client isn't competing with rdate for setting correct time
Fixes upgrade functionality in broadcom routers (broken in 1.3.10)
Fixes bug in display of DHCP lease expiration time

Migrate from brcm-2.4 to brcm47xx target (with 2.6 kernel) for broadcom routers (e.g WRT54GL)
Implement support for dual band routers in AP mode (e.g. D-Link WNDR3700 and D-Link DIR825 b1)
Fixes bug preventing quota rules and restrictions from not being applied properly without a reboot
Fixes wake-on-lan issues and moves WoL functionality to a new, separate section
Fixes initialization of WAN if on alix boards
Improved default QoS rules
Implements wireless signal strength indicator of each wireless

Wake on Lan (WoL) Functionality in Connection/DHCP section for hosts with static IPs (thanks to artekw)
Reset button now works to restore defaults on TP-link routers and WRT160NL if pressed for at least 3 seconds
QSS button on TP-Link routers, and arrow button on WRT160NL now functions as reboot button if pressed for at least 3 seconds
Option in System/Access limits number of remote SSH login attempts in a 5 minute period to prevent brute force password attacks
Fixes several issues with PPPoE, in particular with bandwidth monitor functionality on AR71XX routers by eliminating race conditions
Fixes wireless N with 40Mhz channel-width when using highest wireless channel (by setting HT40- instead of HT40+)

For routers with USB ports, mountd daemon is no longer necessary, which solves a bug causing 100% CPU use and a sluggish router.
Mounting of USB drives immediately after insertion is now more reliable

USB storage drive sharing support via CIFS and/or NFS for some AR71XX routers including WRT160NL, TL-WR1043ND and Routerstation Pro.
B/G/N operation mode, and channel width controls now implemented for routers with ath9k wireless chips
Numerous bug-fixes for AR71XX routers
Improved, lower memory operation of QoS, and active congestion control
Bandwidth settings saved via browser cookies instead of to the router's flash drive, so different configurations are possible on different systems (Thanks to Igor Fedorenko)
Fixes problem with L7 QoS classification introduced in 1.3.5
Fixes error in QoS bps display for active congestion control

Implements Quotas that shape traffic when reached
IMQ modified to hook into INPUT and FORWARD instead of PREROUTING chain, allows post-NAT ingress QoS rules before traffic goes through IMQ
Fixes enabling/disabling of UPnP
Fixes timezone display when timezone is a plain UTC offset
Fixes backwards IPs in web monitor on atheros and alix devices
Fixes DHCP off-by-one error
Fixes setting of ip_conntrack_udp_timeout_stream key

Alix/X86 devices (with madwifi compatible wireless cards) now officially supported
Updated layer7 matching for backfire-supported patterns
Fixes bug causing router to crash when web monitor is active

Enabled ip range matching for included/excluded ips in web monitor
Fixes bug causing only half of IPs excluded/included in web monitor to be displayed
Better exclude searches that are the result of search engines performing a query as a user types it in
Fixes enabling/disabling of quotas
Fix DIR-300 compatibility
Fix bug causing wpa_supplicant to drop broadcast packets when used with madwifi (and wpa encryption is enabled)

Web monitor (when activated) can now record search queries on popular search engines along with recently visited web sites
Completely new web monitor implementation, fixes several bugs in previous versions
Fixes bug in Quota section that prevents quotas from being displayed when a quota with a limit of 0 bytes is defined
AP+WDS wireless mode now displayed properly for one-port atheros routers
Fixes ip range matching on broadcom routers in Backfire

Reset button resets Gargoyle defaults for Atheros 231X/5312 (backported from 1.3.5)
Fixes timezone display when timezone is a plain UTC offset (backported from 1.3.4)
Fixes setting of ip_conntrack_udp_timeout_stream key (backported from 1.3.4)