Cannot access via SSH after brick
Moderator: Moderators
Cannot access via SSH after brick
Hi,
I Tried to upgrade my TP-Link WDR4300 V1 to the latest ispy build (May 12).
Unfortunately I think I bricked my router. I have managed to get to failsafe and telnet into the router however I cannot ssh into the router.
So far I have.
Failsafe - telnet - firstboot - mount_root - passwd.
I have tried to understand the openwrt wiki but cannot see what I am missing.
Any ideas?
Thanks
kip
I Tried to upgrade my TP-Link WDR4300 V1 to the latest ispy build (May 12).
Unfortunately I think I bricked my router. I have managed to get to failsafe and telnet into the router however I cannot ssh into the router.
So far I have.
Failsafe - telnet - firstboot - mount_root - passwd.
I have tried to understand the openwrt wiki but cannot see what I am missing.
Any ideas?
Thanks
kip
Router TP Link WDR4300 V1.7 Gargoyle 1.13.0 Ispy 20210723
Re: Cannot access via SSH after brick
On your PC fix the ip address, say
Direct connect a LAN cable router to PC
from command line
power up your router and see what happens
Code: Select all
192.168.1.10
from command line
Code: Select all
ping 192.168.1.1 -t
Re: Cannot access via SSH after brick
G'day Ispy,
I already have this setup. I can ping and telnet into the router from my pc. I just can't ssh. I tried the 192.168.1.1 -t and it the normal ping result
Thanks
kip
I already have this setup. I can ping and telnet into the router from my pc. I just can't ssh. I tried the 192.168.1.1 -t and it the normal ping result
Thanks
kip
Router TP Link WDR4300 V1.7 Gargoyle 1.13.0 Ispy 20210723
Re: Cannot access via SSH after brick
somebody has changed the wiki, its hard to read now
from telnet
what happens?
from telnet
Code: Select all
mount_root
Code: Select all
mtd -r erase rootfs_data
Re: Cannot access via SSH after brick
Thanks Ispy,
I did see that and was going to try them all. Followed your reponse.
All good now. One thing how do I know I'm on your latest build?
Thanks again
kip
I did see that and was going to try them all. Followed your reponse.
All good now. One thing how do I know I'm on your latest build?
Thanks again
kip
Router TP Link WDR4300 V1.7 Gargoyle 1.13.0 Ispy 20210723
Re: Cannot access via SSH after brick
Tip
The newer TP-Links are currently unstable as I suspect you have found out (subject to change)
My RSPro is rock solid
The newer TP-Links are currently unstable as I suspect you have found out (subject to change)
My RSPro is rock solid
Re: Cannot access via SSH after brick
Thanks again, Ispy.
I am thinking about an Archer C7 just to get AC but I think I will wait awhile
Regards
kip
I am thinking about an Archer C7 just to get AC but I think I will wait awhile
Regards
kip
Router TP Link WDR4300 V1.7 Gargoyle 1.13.0 Ispy 20210723