Hi
I set up Gargolye on TP-Link 841N and TP-Link 1043. Problem is that after some days they lose it's settings and I have to set up again. It looks like router is reset to clear settings.
This is unusable for now. Could anybody help with this issue ?
With Regards
Gargolye lose settings
Moderator: Moderators
Re: Gargolye lose settings
Under which version is this happening?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Gargolye lose settings
фор 841Н ис gargoyle_1.9.0-ar71xx-generic-tl-wr841n-v8 is for 841n,
for TP-Link 1043 ис gargoyle_1.9.0-ar71xx-generic-tl-wr1043nd-v1
With Regards
for TP-Link 1043 ис gargoyle_1.9.0-ar71xx-generic-tl-wr1043nd-v1
With Regards
Re: Gargolye lose settings
Try flashing the firmware again. It sounds like something is not right.
The 841 may be better off on 1.8.1
The 841 may be better off on 1.8.1
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Gargolye lose settings
HI
Thanks a lot for your support. I will try with 1.8.1. I tried with two types routers to be sure that problem do not depend of hardware, but it reproduced with both of them. I will test with stable version and will return feedback with results.
With Regards
Thanks a lot for your support. I will try with 1.8.1. I tried with two types routers to be sure that problem do not depend of hardware, but it reproduced with both of them. I will test with stable version and will return feedback with results.
With Regards