Hello,
Hoping there is a quick fix for this as I'm not sure a reset would work before the router resets. I have quotas set up and never had any issues. I was playing with QoS settings tonight for the first time and eventually ran into the router rebooting. It continues to do this. I have tried to shell into it and perform a /etc/init.d/qos_gargoyle stop and disable along with a reboot but it continues to reboot every couple minutes. Is there anyway I can get the router stable again?
Current memory:
Mem: 32276K used, 29464K free, 0K shrd, 3840K buff, 11572K cached
QoS Reboots
Moderator: Moderators
-
digitalslave
- Posts: 4
- Joined: Tue Mar 22, 2016 10:54 pm
QoS Reboots
Last edited by digitalslave on Tue Mar 22, 2016 11:50 pm, edited 1 time in total.
-
digitalslave
- Posts: 4
- Joined: Tue Mar 22, 2016 10:54 pm
Re: QoS Reboots
I think it is stable with bwmon_gargoyle disabled along with qos but I really need the quotas enabled. Assuming something may need cleared out to keep it stable? Any help is appreciated.
Re: QoS Reboots
Follow the discussion here
viewtopic.php?f=11&t=8504&p=36935#p36935
The same method should bail you out.
viewtopic.php?f=11&t=8504&p=36935#p36935
The same method should bail you out.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
-
digitalslave
- Posts: 4
- Joined: Tue Mar 22, 2016 10:54 pm
Re: QoS Reboots
Lantis,
Thank you very much!! It must have been a time issue. Not at all what I was searching the forum for in the first place since I was messing with the QoS settings. Before I decided to wipe the directory mentioned or update the firmware I figured it was worth a shot to see if I was no longer in the future. I enabled quotas and QoS and everything is running smoothly today!
Thank you very much!! It must have been a time issue. Not at all what I was searching the forum for in the first place since I was messing with the QoS settings. Before I decided to wipe the directory mentioned or update the firmware I figured it was worth a shot to see if I was no longer in the future. I enabled quotas and QoS and everything is running smoothly today!