heya,
Our old c*appy D-Link ADSL2+ Modem/Router just gave up the ghost, so I'm looking at replacing it with a nice decent, flashable model (previously, I was linking it to a WRT54G, to provide the actual wireless access-point capabilities).
Anyhow, are there any integrated ADSL2+ modem/routers that are known to work well with Gargoyle?
Cheers,
Victor
Recommended ADSL2+ Modem/Router that Supports Gargoyle?
Moderator: Moderators
-
- Posts: 10
- Joined: Mon Aug 16, 2010 7:57 am
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Recommended ADSL2+ Modem/Router that Supports Gargoyle?
This might be something you can get working on your own.
Officially, no router/modem combo is supported by any of
the 3rd party firmwares like OpenWRT/Gargoyle or DD-WRT, etc.
Reason being, usually there is only support and drivers loaded
for the Wired (ethernet or GB ethernet) and Wireless (G/N)
You would probably have to look for another router that you
can get full support from Gargoyle and bridge it to the DSL modem.
Officially, no router/modem combo is supported by any of
the 3rd party firmwares like OpenWRT/Gargoyle or DD-WRT, etc.
Reason being, usually there is only support and drivers loaded
for the Wired (ethernet or GB ethernet) and Wireless (G/N)
You would probably have to look for another router that you
can get full support from Gargoyle and bridge it to the DSL modem.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400