i've got TL-WR1043ND v1.1 with dd-wrt and want to upgrade to Gargoyle. but after i flash the BIN file the router restart and come up with the same dd-wrt
what am i doing wrong?
upgrade of TL-WR1043ND v1.1
Moderator: Moderators
-
dlogictech
- Posts: 118
- Joined: Sat Feb 07, 2015 3:50 pm
- Location: Unionville, Ontario. Canada.
- Contact:
Re: upgrade of TL-WR1043ND v1.1
Hello Aboren,aboren wrote:i've got TL-WR1043ND v1.1 with dd-wrt and want to upgrade to Gargoyle. but after i flash the BIN file the router restart and come up with the same dd-wrt
what am i doing wrong?
You might want to verify that the correct file is used:
gargoyle_1.7.1-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin
The above file name is directly from the download page:
http://www.gargoyle-router.com/download.php
Maybe even re-download the file and try again.
D-Link DIR-835 Rev. A1 using Gargoyle
1.9.X (Built 20160524-1903 git@004a64c)
TP-Link TL-WR1043ND Ver. 1.6 using Gargoyle
1.9.1
TP-Link TL-WR740N Ver. 1.10 using Gargoyle
1.9.1
1.9.X (Built 20160524-1903 git@004a64c)
TP-Link TL-WR1043ND Ver. 1.6 using Gargoyle
1.9.1
TP-Link TL-WR740N Ver. 1.10 using Gargoyle
1.9.1
-
dlogictech
- Posts: 118
- Joined: Sat Feb 07, 2015 3:50 pm
- Location: Unionville, Ontario. Canada.
- Contact:
Re: upgrade of TL-WR1043ND v1.1
Hello Aboren
Did this work for you?
Did this work for you?
D-Link DIR-835 Rev. A1 using Gargoyle
1.9.X (Built 20160524-1903 git@004a64c)
TP-Link TL-WR1043ND Ver. 1.6 using Gargoyle
1.9.1
TP-Link TL-WR740N Ver. 1.10 using Gargoyle
1.9.1
1.9.X (Built 20160524-1903 git@004a64c)
TP-Link TL-WR1043ND Ver. 1.6 using Gargoyle
1.9.1
TP-Link TL-WR740N Ver. 1.10 using Gargoyle
1.9.1