Routing seems to work, but my users complain of sluggishness. My install of nodogsplash works for a while, and then starts misbehaving. None of these issues were present with openwrt kamikaze. The nodogsplash issue seems to be with the time of the router, as the reported avg speeds goes from normal to very low, as in 0.00000000000002 kbit/s.
I have also had problems removing quotas on the page http://192.168.1.1/quotas.sh
Please advise on whether I should reinstall, reinstall with package(s) from a clean kamikaze or some other option. =)
Here goes my log:
Code: Select all
Jan 1 01:00:09 d3fault user.warn kernel: Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
Jan 1 01:00:09 d3fault user.warn kernel: CPU: BCM5365 rev 1 at 200 MHz
Jan 1 01:00:09 d3fault user.warn kernel: Using 100.000 MHz high precision timer.
Jan 1 01:00:09 d3fault user.warn kernel: Calibrating delay loop... 199.47 BogoMIPS
Jan 1 01:00:09 d3fault user.info kernel: Memory: 30464k/32768k available (1432k kernel code, 2304k reserved, 96k data, 84k init, 0k highmem)
Jan 1 01:00:09 d3fault user.info kernel: Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 01:00:09 d3fault user.info kernel: Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Jan 1 01:00:09 d3fault user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 1 01:00:09 d3fault user.info kernel: Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:09 d3fault user.warn kernel: Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:09 d3fault user.warn kernel: Checking for 'wait' instruction... unavailable.
Jan 1 01:00:09 d3fault user.warn kernel: POSIX conformance testing by UNIFIX
Jan 1 01:00:09 d3fault user.warn kernel: PCI: Initializing host
Jan 1 01:00:09 d3fault user.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:09 d3fault user.warn kernel: PCI: Fixing up bridge
Jan 1 01:00:09 d3fault user.debug kernel: PCI: Setting latency timer of device 01:00.0 to 64
Jan 1 01:00:09 d3fault user.warn kernel: PCI: Fixing up bus 1
Jan 1 01:00:09 d3fault user.info kernel: Linux NET4.0 for Linux 2.4
Jan 1 01:00:09 d3fault user.info kernel: Based upon Swansea University Computer Society NET3.039
Jan 1 01:00:09 d3fault user.warn kernel: Initializing RT netlink socket
Jan 1 01:00:09 d3fault user.warn kernel: Starting kswapd
Jan 1 01:00:09 d3fault user.warn kernel: Registering mini_fo version $Id$
Jan 1 01:00:09 d3fault user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Jan 1 01:00:09 d3fault user.info kernel: devfs: boot_options: 0x1
Jan 1 01:00:09 d3fault user.notice kernel: JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Jan 1 01:00:09 d3fault user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 01:00:09 d3fault user.warn kernel: pty: 256 Unix98 ptys configured
Jan 1 01:00:09 d3fault user.info kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jan 1 01:00:09 d3fault user.info kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
Jan 1 01:00:09 d3fault user.info kernel: ttyS01 at 0xb8000400 (irq = 3) is a 16550A
Jan 1 01:00:09 d3fault user.info kernel: b44.c:v0.93 (Mar, 2004)
Jan 1 01:00:09 d3fault user.debug kernel: PCI: Setting latency timer of device 00:01.0 to 64
Jan 1 01:00:09 d3fault user.info kernel: eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:d4:d1:fa:5b
Jan 1 01:00:09 d3fault user.debug kernel: Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Jan 1 01:00:09 d3fault user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Jan 1 01:00:09 d3fault user.debug kernel: Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Jan 1 01:00:09 d3fault user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Jan 1 01:00:09 d3fault user.debug kernel: Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Jan 1 01:00:09 d3fault user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Jan 1 01:00:09 d3fault user.debug kernel: Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Jan 1 01:00:09 d3fault user.notice kernel: Amd/Fujitsu Extended Query Table v1.1 at 0x0040
Jan 1 01:00:09 d3fault user.notice kernel: number of CFI chips: 1
Jan 1 01:00:09 d3fault user.notice kernel: cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Jan 1 01:00:09 d3fault user.notice kernel: Flash device: 0x400000 at 0x1c000000
Jan 1 01:00:09 d3fault user.notice kernel: bootloader size: 262144
Jan 1 01:00:09 d3fault user.info kernel: Physically mapped flash: Filesystem type: squashfs, size=0x2068c9
Jan 1 01:00:09 d3fault user.notice kernel: Creating 5 MTD partitions on "Physically mapped flash":
Jan 1 01:00:09 d3fault user.notice kernel: 0x00000000-0x00040000 : "cfe"
Jan 1 01:00:09 d3fault user.notice kernel: 0x00040000-0x003f0000 : "linux"
Jan 1 01:00:09 d3fault user.notice kernel: 0x000bb800-0x002d0000 : "rootfs"
Jan 1 01:00:09 d3fault user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan 1 01:00:09 d3fault user.notice kernel: 0x003f0000-0x00400000 : "nvram"
Jan 1 01:00:09 d3fault user.notice kernel: 0x002d0000-0x003f0000 : "rootfs_data"
Jan 1 01:00:09 d3fault user.err kernel: sflash: found no supported devices
Jan 1 01:00:09 d3fault user.info kernel: Initializing Cryptographic API
Jan 1 01:00:09 d3fault user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 1 01:00:09 d3fault user.info kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jan 1 01:00:09 d3fault user.info kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan 1 01:00:09 d3fault user.info kernel: TCP: Hash tables configured (established 2048 bind 4096)
Jan 1 01:00:09 d3fault user.info kernel: Linux IP multicast router 0.06 plus PIM-SM
Jan 1 01:00:09 d3fault user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 01:00:09 d3fault user.info kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 01:00:09 d3fault user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan 1 01:00:09 d3fault user.info kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 01:00:09 d3fault user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:09 d3fault user.info kernel: Mounted devfs on /dev
Jan 1 01:00:09 d3fault user.info kernel: Freeing unused kernel memory: 84k freed
Jan 1 01:00:09 d3fault user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:09 d3fault user.warn kernel: diag: Detected 'ASUS WL-500g Deluxe'
Jan 1 01:00:09 d3fault user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 01:00:09 d3fault user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 01:00:09 d3fault user.info kernel: roboswitch: Pr
Jan 1 01:00:09 d3fault user.info kernel: obing device eth0: found!
Jan 1 01:00:09 d3fault user.info kernel: mini_fo: using base directory: /
Jan 1 01:00:09 d3fault user.info kernel: mini_fo: using storage directory: /jffs
Jan 1 01:00:09 d3fault user.warn kernel: jffs2.bbc: SIZE compression mode activated.
Jan 1 01:00:12 d3fault user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 01:00:12 d3fault user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 01:00:14 d3fault user.debug kernel: eth0.0: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:14 d3fault user.debug kernel: eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
Jan 1 01:00:15 d3fault user.info kernel: eth0.0: dev_set_promiscuity(master, 1)
Jan 1 01:00:15 d3fault user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:15 d3fault user.info kernel: device eth0.0 entered promiscuous mode
Jan 1 01:00:15 d3fault user.info kernel: br-lan: port 1(eth0.0) entering learning state
Jan 1 01:00:15 d3fault user.info kernel: br-lan: port 1(eth0.0) entering forwarding state
Jan 1 01:00:15 d3fault user.info kernel: br-lan: topology change detected, propagating
Jan 1 01:00:18 d3fault user.debug kernel: PCI: Setting latency timer of device 01:03.0 to 64
Jan 1 01:00:18 d3fault user.warn kernel: PCI: Enabling device 01:03.0 (0004 -> 0006)
Jan 1 01:00:18 d3fault user.emerg kernel: PCI/DMA
Jan 1 01:00:18 d3fault user.emerg kernel: wl0: wlc_attach: chiprev 3 coreunit 0 corerev 5 cccap 0x4002a maccap 0x0 band 2.4G, phy_type 2 phy_rev 2 ana_rev 2
Jan 1 01:00:18 d3fault user.warn kernel: wl0: Broadcom BCM4320 802.11 Wireless Controller 4.150.10.5
Jan 1 01:00:18 d3fault user.info sysinit: Warning: loading wl will taint the kernel: non-GPL license - Proprietary
Jan 1 01:00:18 d3fault user.info sysinit: See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Jan 1 01:00:19 d3fault user.info kernel: CSLIP: code copyright 1989 Regents of the University of California
Jan 1 01:00:19 d3fault user.info kernel: PPP generic driver version 2.4.2
Jan 1 01:00:20 d3fault user.warn kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 01:00:23 d3fault daemon.notice miniupnpd[366]: HTTP listening on port 5000
Jan 1 01:00:24 d3fault user.warn kernel: ip_conntrack version 2.1 (5953 buckets, 5953 max) - 352 bytes per conntrack
Jan 1 01:00:25 d3fault user.info sysinit: 2.europe.pool.ntp.org: Unknown host
Jan 1 01:00:25 d3fault user.info sysinit: 1.europe.pool.ntp.org: Unknown host
Jan 1 01:00:25 d3fault user.info sysinit: 0.europe.pool.ntp.org: Unknown host
Jan 1 01:00:26 d3fault user.info kernel: ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
Jan 1 01:00:30 d3fault daemon.notice miniupnpd[366]: received signal 15, good-bye
Jan 1 01:00:30 d3fault user.info kernel: IPP2P v0.8.1_rc1 loading
Jan 1 01:00:31 d3fault user.notice upnp firewall: removing wan interface
Jan 1 01:00:31 d3fault user.info kernel: imq driver loaded.
Jan 1 01:00:32 d3fault daemon.notice miniupnpd[523]: HTTP listening on port 5000
Jan 1 01:00:33 d3fault daemon.notice miniupnpd[523]: received signal 15, good-bye
Jan 1 01:00:34 d3fault user.notice upnp firewall: removing wan interface
Jan 1 01:00:36 d3fault user.notice upnp firewall: adding wan interface eth0.1()
Jan 1 01:00:37 d3fault daemon.notice miniupnpd[617]: HTTP listening on port 5000
Jan 1 01:00:42 d3fault user.info kernel: device wl0 entered promiscuous mode
Jan 1 01:00:42 d3fault user.info kernel: wl0: attempt to add interface with same source address.
Jan 1 01:00:42 d3fault user.info kernel: br-lan: port 2(wl0) entering learning state
Jan 1 01:00:42 d3fault user.info kernel: br-lan: port 2(wl0) entering forwarding state
Jan 1 01:00:42 d3fault user.info kernel: br-lan: topology change detected, propagating
Jun 2 21:08:09 d3fault user.info sysinit: 2.europe.pool.ntp.org: Unknown host
Jun 2 21:08:09 d3fault user.info sysinit: 1.europe.pool.ntp.org: Unknown host
Jun 2 21:08:09 d3fault user.info sysinit: 0.europe.pool.ntp.org: Unknown host
Jun 2 21:08:10 d3fault user.info sysinit: Loading defaults
Jun 2 21:08:11 d3fault user.info sysinit: Loading synflood protection
Jun 2 21:08:11 d3fault user.info sysinit: Adding custom chains
Jun 2 21:08:11 d3fault user.info sysinit: Loading zones
Jun 2 21:08:13 d3fault user.info sysinit: Loading forwarding
Jun 2 21:08:13 d3fault user.info sysinit: Loading redirects
Jun 2 21:08:13 d3fault user.info sysinit: Loading rules
Jun 2 21:08:14 d3fault user.info sysinit: Loading includes
Jun 2 21:08:15 d3fault user.info sysinit: iptables -t filter -A input_wan -p tcp --dport 22 -m connmark --mark 0x0080/0x0080 -j ACCEPT
Jun 2 21:08:18 d3fault user.info sysinit: l7 used = ""
Jun 2 21:08:19 d3fault user.notice upnp firewall: removing wan interface
Jun 2 21:08:19 d3fault user.notice upnp firewall: adding wan interface eth0.1(xxx.xxx.xxx.xxx)
Jun 2 21:08:21 d3fault daemon.notice miniupnpd[617]: received signal 15, good-bye
Jun 2 21:08:21 d3fault user.notice upnp firewall: removing wan interface
Jun 2 21:08:23 d3fault user.notice upnp firewall: adding wan interface eth0.1(xxx.xxx.xxx.xxx)
Jun 2 21:08:24 d3fault daemon.notice miniupnpd[1182]: HTTP listening on port 5000
Jun 2 21:08:25 d3fault user.notice root: starting ntpclient
Jun 2 21:09:33 d3fault user.notice root: adding lan (br-lan) to firewall zone lan
Jun 2 21:09:36 d3fault user.notice root: adding wan (eth0.1) to firewall zone wan
Jun 2 21:09:36 d3fault cron.err crond[1319]: crond (busybox 1.11.2) started, log level 5
Jun 2 21:09:37 d3fault authpriv.info dropbear[1325]: Running in background
Jun 2 21:09:38 d3fault daemon.crit httpd_gargoyle[1347]: socket :: - Address family not supported by protocol
Jun 2 21:09:38 d3fault daemon.warn httpd_gargoyle[1351]: started as root without requesting chroot(), warning only
Jun 2 21:09:38 d3fault daemon.notice httpd_gargoyle[1351]: httpd_gargoyle/1.0 14mar2008 starting on d3fault, port 443
Jun 2 21:09:46 d3fault cron.err crond[1744]: crond (busybox 1.11.2) started, log level 5
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: started, version 2.47 cachesize 150
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: compile time options: IPv6 GNU-getopt no-DBus no-I18N TFTP
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: DHCP, IP range 192.168.2.100 -- 192.168.2.251, lease time 12h
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: using local addresses only for domain lan
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: reading /tmp/resolv.conf.auto
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: using nameserver 8.8.4.4#53
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: using nameserver 8.8.8.8#53
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: using local addresses only for domain lan
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: read /etc/hosts - 1 addresses
Jun 2 21:09:50 d3fault daemon.info dnsmasq[1762]: read /etc/ethers - 0 addresses
Jun 2 21:09:50 d3fault user.info sysinit: Starting nodogsplash ...
Jun 2 21:09:51 d3fault user.info sysinit: Testing required modules
Jun 2 21:09:51 d3fault user.info sysinit: Testing module ipt_mac
Jun 2 21:09:51 d3fault user.info sysinit: ipt_mac is working
Jun 2 21:09:51 d3fault user.info sysinit: Testing module ipt_mark
Jun 2 21:09:51 d3fault user.info sysinit: ipt_mark is working
Jun 2 21:09:51 d3fault user.info sysinit: Testing module imq numdevs=2
Jun 2 21:09:51 d3fault user.info sysinit: imq is working
Jun 2 21:09:51 d3fault user.info sysinit: Testing module ipt_IMQ
Jun 2 21:09:51 d3fault user.info sysinit: ipt_IMQ is working
Jun 2 21:09:51 d3fault user.info sysinit: Testing module sch_htb
Jun 2 21:09:51 d3fault user.info sysinit: Module sch_htb needed
Jun 2 21:09:51 d3fault user.info sysinit: Scanning disk for sch_htb module
Jun 2 21:09:51 d3fault user.info sysinit: sch_htb exists, trying to load
Jun 2 21:09:52 d3fault user.info sysinit: sch_htb loaded successfully
Jun 2 21:09:52 d3fault user.info sysinit: OK: nodogsplash started
Jun 2 21:09:53 d3fault daemon.info dnsmasq[1762]: DHCPDISCOVER(br-lan) 00:16:cb:bb:fe:2a
Jun 2 21:09:53 d3fault daemon.info dnsmasq[1762]: DHCPOFFER(br-lan) 192.168.2.232 00:16:cb:bb:fe:2a
Jun 2 21:09:54 d3fault daemon.info dnsmasq[1762]: DHCPREQUEST(br-lan) 192.168.2.232 00:16:cb:bb:fe:2a
Jun 2 21:09:54 d3fault daemon.info dnsmasq[1762]: DHCPACK(br-lan) 192.168.2.232 00:16:cb:bb:fe:2a klimt
Jun 2 21:09:54 d3fault user.info kernel: device br-lan entered promiscuous mode
Jun 2 21:09:54 d3fault user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jun 2 21:09:54 d3fault user.info sysinit: (Did you specify correct configuration file path?)
Jun 2 21:09:57 d3fault user.info sysinit: sysctl: error: 'net.netfilter.nf_conntrack_checksum' is an unknown key
Jun 2 21:09:57 d3fault user.info sysinit: sysctl: error: 'net.ipv4.netfilter.ip_conntrack_checksum' is an unknown key
Jun 2 21:09:57 d3fault user.info sysinit: sysctl: error: 'net.ipv4.netfilter.ip_conntrack_udp_timout_stream' is an unknown key
Jun 2 21:10:04 d3fault daemon.info dnsmasq[1762]: DHCPREQUEST(br-lan) 192.168.2.236 00:1e:4c:0f:b8:e7
Jun 2 21:10:04 d3fault daemon.info dnsmasq[1762]: DHCPACK(br-lan) 192.168.2.236 00:1e:4c:0f:b8:e7 hostname
Jun 2 21:11:01 d3fault cron.err crond[1744]: USER root pid 2026 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Jun 2 21:16:34 d3fault daemon.crit httpd_gargoyle[2066]: error: can't initialize ssl connection, error = 6
Jun 2 21:16:34 d3fault daemon.crit httpd_gargoyle[2080]: error: can't initialize ssl connection, error = 6
Jun 2 21:16:34 d3fault daemon.crit httpd_gargoyle[2082]: error: can't initialize ssl connection, error = 6
Jun 2 21:16:34 d3fault daemon.crit httpd_gargoyle[2083]: error: can't initialize ssl connection, error = 6
#######...........continued as long as I use the web interface.......
Jun 2 21:21:01 d3fault cron.err crond[1744]: USER root pid 2778 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1