OpenVPN client connection problem

[eugene28]

Trying unsuccessfully connect to vpngate OpenVPN. No problem with OpenVPN gui under windows. But in gargoyle I can not find my mistake.
I'm using freely available VPNgate servers.
.ovpn file:
client
remote 178.252.xx.xx 995
proto tcp
dev tun
ca ca.crt
cert client.crt
key client.key
resolv-retry infinite
nobind
persist-key
persist-tun
verb 3
cipher AES-128-CBC
auth SHA1
;dhcp-option DNS 8.8.8.8
;mute-replay-warnings
;mute 20

Any idea?

[eugene28]

Any ideas?

[Eric]

I just checked out the files provided by vpngate, and the problem is likely that vpngate embeds the keys and certificates in the openvpn config file, which is not supported by gargoyle -- these need to be separate files.

Look at the code under the <ca> <cert> and <key> headings in the vpngate config file. Remove that code and save as separate files without the headers/footers (e.g. the <ca></ca>). Then upload those files.

[eugene28]

This is what I did if you look on my post above. I have split ovpn file into 4 and uploaded. The keys and certificates are identical. There is something wrong in ovpn file. Could you have a look at my post again?
In total. When I upload individual files service starts but no connection to server. When I try to change setting manually and hit apply. Service does not start at all.

[Eric]

I will test further. I'm working on some improvements for OpenVPN right now anyway, so I'll see if I can fix this.