LAN/Wifi keeps dying

[Swimmer]

Hey,

I'm using_

Gargoyle version 1.5.9 | OpenWrt Attitude Adjustment branch |
| Gargoyle revision f73df29 | OpenWrt revision r34879 |
| Built January 03, 2013 | Target ar71xx/usb_large

Now my wifi and LAN are dying after a short period of time working.

After a /etc/init.d/network restart, Lan works for 1 minute and Wifi stays off.

If I do a "wifi", the Wlan gets up and works.

Lan stays dead.

What can I do?

[Swimmer]

After network restart,

I was checking dmesg but when LAN dies, there is no change in dmesg

EDIT: I can still use WOL but when the computer turns on, I don't have LAN.

[DoesItMatter]

What router are you using?

Try and upgrade to 1.5.10 - DO NOT keep settings

Fresh configure the router with 1.5.10 and see how it performs.

[Swimmer]

I'm using TP Link 1043

The system was working, only had problems with OpenVPN while trying to access shared folders in a LAN computer from a openvpn client.

Unfortunately, the router is far away and I can't re-flash it or I'll lose all the remaining connections.

The stange is that I can wake on lan to the same computer that lose the LAN ip after 1m (+/-) after doing a network restart

[Swimmer]

Any thing that I can get (logs or sort) in order to understand where is the problem?

[demoralized]

I have a similar issue. Affter 5 stable days router lock's itself and kicks all users. So i can't access router via web gui and no client can't connect on it.

Using PPPoE
AP
20 MHz
Channel 1 (only stable)
N+G+B
PSK 2