Cannot load svg on Bandwidth Usage page anymore

General discussion about Gargoyle, OpenWrt or anything else even remotely related to the project

Moderator: Moderators

Post Reply
Tammy
Posts: 2
Joined: Mon Sep 24, 2012 3:06 am

Cannot load svg on Bandwidth Usage page anymore

Post by Tammy »

I was able to see the plots before.
But currently failed under IE and Chrome.
Anyone knows the reason?
Thanks!
Top
ispyisail
Moderator
Posts: 5212
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Cannot load svg on Bandwidth Usage page anymore

Post by ispyisail »

firmware version?

hardware?
Top
Tammy
Posts: 2
Joined: Mon Sep 24, 2012 3:06 am

Re: Cannot load svg on Bandwidth Usage page anymore

Post by Tammy »

newest gargoyle: 1.5.7
hw: WRT54GS
Top
ispyisail
Moderator
Posts: 5212
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Cannot load svg on Bandwidth Usage page anymore

Post by ispyisail »

EOL Notice for brcm-2.4:
Kernel 2.4 support has been dropped from Attitude Adjustment. For most devices using brcm47xx images is fine, but older models with only 16 MiB RAM or slower CPUs (200 Mhz) will not run properly with it. So for those devices, sticking with backfire is recommended.
Top
Post Reply

Return to “General Discussion”