Hello everybody!
I've got TP-link 1043nd with Gargoyle RouterOS 1.4.3 (lattest at that time).
Is there any way to select wireless n-mode only not mixed to boost more perfomance of connection...
Second question is how to use mimo function of device to boost perfomance for single tread download becouse for video 1080p films 3-4 mb/s not always enough. When i've tested usb stick at same place through torrent i've reach speed about 6-7 mb/s at same condition but from TV set films reach bitrate 3mb/s start laggy.
My stick is Edimax EW-7717Un (up to 300 (but actualy 300/150))
Router Reports
#(unknown) 10.10.10.107 00:1F:xx:xx:xx:xx 150.0 -54#
so i think it report RX rate of stick not TX.
details
[*]
signal: -54 dBm
signal avg: -55 dBm
tx bitrate: 180.0 MBit/s MCS 12 40Mhz short GI
rx bitrate: 150.0 MBit/s MCS 7 40Mhz short GI
[*]
I don't know why it can't reach 300 ... signal is good 3 antenna router.
Thanks alot for any advices =)