Lantis wrote:Going from LEDE to Gargoyle you will need to use the command line to force the sysupgrade (do not preserve settings).
Going back to LEDE you should be able to use the GUI (do not preserve settings).
If you are on Windows, you will need WinScp to copy the linksys firmware to the / tmp directory of your WRT1900ACS
Open Winscp, click on new website and then enter the ip of the router, enter the option SCP enter user and password of the router and of enter or click on login.
On the right side navigate to the tmp folder, then on the left side navigate to where you saved the firmware and copy into the tmp folder.
After the transfer, close the Winsp, and open putty.
In the Putty type root@192.168.1.1 and then you will be prompted for the router password enter the password and enter.
Done this, select the directory in Putty with the command cd /tmp.
And then run the command sysupgrade -n -F (your firmware.any) where you are between relatives enter the full name of the firmware with extension.
Then enter and the router will start to update and then reboot already with linksys firmware.
I can use this procedure to get to Gargoyle from Openwrt?
I ask because you told me about the command line to force the sysupgrade.I do not know what you mean, you can explain the steps i need to follow in detail....
To be honest i'm not an expert in using openwrt, that's why i'm looking for a software alternative for this router
Thank you
