Report wireless and/or network connectivity problems in this forum.
Moderator: Moderators
-
CBx86
- Posts: 157
- Joined: Sun Jan 05, 2014 5:43 pm
- Location: Brazil
Post
by CBx86 »
Your connection status, accessible in modem.
Something like this:
Code: Select all
Uptime: 15 days, 0:15:01
Modulation: G.992.5 Annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,279 / 12,797
Data Transferred (Sent/Received) [KB/KB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.5 / 0.0
Line Attenuation (Up/Down) [dB]: 5.0 / 5.5
SN Margin (Up/Down) [dB]: 6.5 / 23.5
Vendor ID (Local/Remote): TMMB / µ
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 0
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0
-
RomanHK
- Posts: 794
- Joined: Sat May 04, 2013 4:18 pm
- Location: Czech Republik
Post
by RomanHK »
CBx86 wrote: ↑Thu Jul 09, 2020 12:11 pm
Paste here, your modem DSL stats.
It will not be a modem error. It's going well in DD-WRT. The problem will be in the pppd daemon and the settings around it.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
-
RomanHK
- Posts: 794
- Joined: Sat May 04, 2013 4:18 pm
- Location: Czech Republik
Post
by RomanHK »

An interesting topic is here:
https://forum.turris.cz/t/pppd-killed-o ... edly/13013
Using the settings in the
/etc/ppp/options file, you can set various settings such as debugging, logging, additional commands.
Try playing with the lcp-echo-x commands:
Code: Select all
lcp-echo-failure 0
lcp-echo-interval 0
(I haven't tested whether this will work)
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users