Hello,
I am getting a asus RT N-16 & I have a TP-link WR941ND. I have installed gargoyle 1.5.1 in TPlink & I am yet to decide what to install in Asus router. The thing is both routers are connected to separate internet connections.Now if i install some servers in asus router can i configure it to bind for the internet of TPlink ? If so please let me know how to proceed.
Thanks
Linking Two Routers
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Linking Two Routers
hellbound,
For your Asus RT-N16 - goto the DD-WRT forums
I tried Tomato firmware, but DD-WRT performs much better with
the Asus RT-N16 - look for the Kong build
I'm running the King Kong build 18010 (from my sig) and it has just
about any feature you would want or use and so far its quite stable.
Only thing I also did to my RT-N16 is replace the 3 omni-directional
antennas on it with 3 directional panel antennas
Signal range greatly improved and much easier to aim the signal.
As far as having 2 internets into 1 router - also check the DD-WRT
forums as they have tutorials on how to set that up through
DD-WRT and command line entries.
For your Asus RT-N16 - goto the DD-WRT forums
I tried Tomato firmware, but DD-WRT performs much better with
the Asus RT-N16 - look for the Kong build
I'm running the King Kong build 18010 (from my sig) and it has just
about any feature you would want or use and so far its quite stable.
Only thing I also did to my RT-N16 is replace the 3 omni-directional
antennas on it with 3 directional panel antennas
Signal range greatly improved and much easier to aim the signal.
As far as having 2 internets into 1 router - also check the DD-WRT
forums as they have tutorials on how to set that up through
DD-WRT and command line entries.


2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 38
- Joined: Thu Jan 13, 2011 11:39 pm
Re: Linking Two Routers
Thanks for the suggestion. I dont want DUAL wan all i want is some optware package installed in asus will use the TP-Link's gateway as default.