Installation Issue Problem

[siedrosat]

Hi I have a problem with fonera 2200, i try install the last version of gargoyle 1.4.2 for fonera. I use the Flash fon software, the program end with pop up "Device flash successful", but the fonera not working.
I have the same problem with dd-wrt with error "Can't program region at 0x80041000: Unknown error
This is the log after the update with fon flash.

Code: Select all

+Ethernet eth0: MAC address 00:18:84:80:ed:d4
IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.1.1
Default server: 192.168.1.166

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version V1.00 - built 10:37:27, Dec 12 2006

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: FON1
RAM: 0x80000000-0x81000000, [0x80040aa0-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 10.000 seconds - enter ^C to abort
RedBoot> fis load -l vmlinux.bin.l7
No image 'vmlinux.bin.l7' found
RedBoot> exec
Can't execute Linux - invalid entry address
RedBoot> fis list
Name              FLASH addr  Mem addr    Length      Entry point
RedBoot           0xA8000000  0xA8000000  0x00030000  0x00000000
rootfs            0xA8030000  0xA8030000  0x006F0000  0x00000000
FIS directory     0xA87E0000  0xA87E0000  0x0000F000  0x00000000
RedBoot config    0xA87EF000  0xA87EF000  0x00001000  0x00000000
RedBoot>

[DoesItMatter]

What are you using Fon Flash on?

Try a Windows XP computer if at all possible.

Windows Vista/7 have trouble flashing using Fon Flash.

[siedrosat]

I use xp sp3.