Support for Linksys WHW03 V1 (IPQ4019)

[jlvlnzl]

Hi, could you add support for Linksys Velop WHW03 V1 (IPQ4019) (OpenWRT Supported)

Specs:
CPU check Qualcomm IPQ4019
CPU Type ARMv7 Cortex-A7
CPU Speed 716 MHz ( 4 cores )
Flash Chip Samsung KLM4G1FEPD
Flash Size 4 GiB (eMMC NAND)
RAM Size 512 MiB
RAM Chip Nanya NT5CC256M16DP-DI
ETH chip1 Qualcomm IPQ4019
ETH chip2 Qualcomm Atheros QCA8072
Ethernet Port Count 1-1GbE-WAN / 1-1GbE-LAN

Thanks!

[pythonic]

Have you already installed & run OpenWrt on this device?

[jlvlnzl]

Yes, I have. Currently running OpenWrt24.10

[Lantis]

It’s possible.
If you’re willing to test a “beta” I will try to make one available. In the next few days.

[jlvlnzl]

No problem, let me know when it's ready to test it. Thanks

[Lantis]

https://lantisproject.com/downloads/gar ... JwbCI6MTB9

Try from here.

[jlvlnzl]

Just installed.
Glitch on basic web interface:
1. 2.4GHz Channel Width: Just 20mhz by default (no other option via web, 54Mbps), changing /etc/config/Wireless htmode to HT40 improves to 144Mbps.
2. 5GHz Operation Mode: goes to disabled via web although it working fine underneath.

Speedtest:
Wirered: 806/423Mbps
WiFi 5G: 424/412Mbps