Gargoyle Forum

pecou · Post by **pecou** » Sat May 07, 2011 5:41 am

QOS only works for 8 or fewer service classes. 9 or more service classes does not work correctly.
(Alix/x86 - ver. 1.3.13)

Post by **pbix** » Sat May 07, 2011 8:58 am

Please post the rules you are using and your connection list while the miss-operation is underway.

pecou · Post by **pecou** » Sat May 07, 2011 1:55 pm

lan ip = 10.0.0.1
password = password

Old version 1.3.3 to 1.3.9 show the Bandwidth Usage Data OK. The latest version 1.3.13 do not show anything. All new firmware QoS (Download) - Service Classes .... in the attached file (scan01 and scan02) show wrong information. Downloading pc is 10.0.0.2

Post by **pbix** » Sat May 07, 2011 7:34 pm

I have investigated this issue and it seems you are correct that some situationss can cause the QoS bandwidth display to not work properly.

I can report however that your QoS is working properly even if the bandwidth display is messed up. You can verify this yourself by looking at the status->connections page.

Anyway thanks for your report. I will work in this this weekend so check back Sunday evening for an update.

Post by **pbix** » Sun May 08, 2011 8:45 am

Please uncompress the attached qos.js and use it to replace the file of the same name in /www/js. This should resolve this issue.

Please check both upload and download pages and post your results.

pecou · Post by **pecou** » Sun May 08, 2011 1:19 pm

Computer IP 10.0.0.14 - service classes is OK !!!

The problem is that the status -> Bandwidth usage -> QOS Download / Upload class - no graph in the firmware 1.3.13. The older firmware 1.3.3-1.3.9 is OK. See next post.