2 x WRT32x 1.12 SSL certificate error

[cobra98]

I have updated two WRT32x
one from original linksys with factory image,
another one update from 1.10 to 1.12 without preserve settings.
So the one updated from original image has this error when copying by https

"
root@Gargoyle:/tmp# wget https://downloads.openwrt.org/releases/18.06.2/packages
/arm_cortex-a9_vfpv3/base/iperf3_3.5-1_arm_cortex-a9_vfpv3.ipk
Downloading 'https://downloads.openwrt.org/releases/ ... _vfpv3.ipk'
Connecting to 176.9.48.73:443
Connection error: Invalid SSL certificate
"
the other one does not have this problem
Shall i update this one again with upgrade image now too?
Is this a fault in the factory image maybe?

If possible integrate iperf and iperf3 in the images?
Its nice for speed testing

Is there also a way to see the version beeing used from openwrt? 18.06 was not the right one to choose, so i tried up to 18.06.2 which worked to install correct.

[RomanHK]

Try it:

Code: Select all

wget http://downloads.openwrt.org/releases/18.06.2/packages/arm_cortex-a9_vfpv3/base/iperf3_3.5-1_arm_cortex-a9_vfpv3.ipk

or

Code: Select all

wget --no-check-certificate https://downloads.openwrt.org/releases/18.06.2/packages/arm_cortex-a9_vfpv3/base/iperf3_3.5-1_arm_cortex-a9_vfpv3.ipk

[CBx86]

Or try check datetime too.

[RomanHK]

Or try check datetime too.

The correct date and time will not help if it does not have a library in the OpenSSL firmware (eg using the uclient-fetch package).

[Lantis]

You shouldn't run iperf on the router itself. This does not give a true idea of speed and will not be included.

[cobra98]

Thx i tried it already with http and worked.
But the strange is both wrt32x one with factory image
and one with sysupgrade.
The one with sysupgrade didn`t have the problem.