Hello
I am using NEWIFI router, uses MTK7620A chips. Its model number is known as : Newifi Y1.
While Wifi 2.4Ghz is pretty stable but it is completely loses internet after few hours of operation. Gargoyle is connected via "DHCP wired" to another router.
Steps to reproduce the problem
a. Start Gargoyle on 2.4 Ghz Wif and check Internet connectivity is working.
b. Disconnect the WAN ethernet connection for 2 minutes and then connect it back
c. While Wifi connectivity is intact, Internet connectivity is not restored
Workaround
a. Power cycle the Gargoyle sometimes fixes the problem. Say 6 out of 10 times.
b. "Restore Default Configuration", always fixes the problem.
I am able to login into router web interface/Telnet and winscp, hence happy to provide any logs .
Modem Firmware gargoyle_1.11.0-ramips-mt7620-y1-squashfs-sysupgrade.bin
Thanks for all your help in advance
Losing WAN connectivity
Moderator: Moderators
Re: Losing WAN connectivity
This could be an IMG/NAT problem.
Install the latest release since @ispyisail 1.11.X where this problem (and many others) should be solved: viewtopic.php?f=14&t=12159
Install the latest release since @ispyisail 1.11.X where this problem (and many others) should be solved: viewtopic.php?f=14&t=12159
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: Losing WAN connectivity
Thanks. 1.11.X seems to have fixed the problem. I would continue monitoring it. Thanks again.
Re: Losing WAN connectivity
Hello All,
The problem started to appear again with the new firmware
Modem Firmware gargoyle_1.11.X-ramips-mt7620-y1-squashfs-sysupgrade.bin
Any help would be appreciated.
Cheers
The problem started to appear again with the new firmware
Modem Firmware gargoyle_1.11.X-ramips-mt7620-y1-squashfs-sysupgrade.bin
Any help would be appreciated.
Cheers
Re: Losing WAN connectivity
When the problem happens, can you please run the following from the command line of the router:
and the same from the command line of a client connected to the wifi, and in addition:
or substitute your router's IP
Code: Select all
ping 8.8.8.8
nslookup www.google.com
Code: Select all
ping 192.168.1.1
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.