WRT1900AC USB Modem Always Disconected After 24 Hours

[cyberfrog]

Hello Team

I Used Linksys WRT1900AC at Home with 1.11.X (Built 20190623) Firmware and internet broadband connection with usb modem, but i have problem about internet connection using usb modem (Huawei E3372H), the connection always disconnect every 24 hours and not automatic back the internet connection, i have to click Save Change Button first on Connection --- Basic Menu to get my internet connect again. Any solution about this problem team?

Thank You Before.....

[ispyisail]

Can you try 1.10.0 as a test?

Gargoyle factory reset as a test?

This would eliminate a few possible problems

[cyberfrog]

Can you try 1.10.0 as a test?

Gargoyle factory reset as a test?

This would eliminate a few possible problems

Thank You ispyisail for your response,
Yes i already do factory reset but still problem
can you show me where i can download firmware 1.10 for Linksys WRT1900AC?

[ispyisail]

viewtopic.php?f=14&t=11544

[cyberfrog]

viewtopic.php?f=14&t=11544

Thank You ispyisail, i think this link already dead for torrent, i try use torrent downloader it's stuck connecting to peer 7,2%

Any other link's for download?

[RomanHK]

viewtopic.php?f=14&t=11544

Thank You ispyisail, i think this link already dead for torrent, i try use torrent downloader it's stuck connecting to peer 7,2%

Any other link's for download?

Here I replied: viewtopic.php?f=14&p=54032#p54032

[cyberfrog]

viewtopic.php?f=14&t=11544

Thank You ispyisail, i think this link already dead for torrent, i try use torrent downloader it's stuck connecting to peer 7,2%

Any other link's for download?

Here I replied: viewtopic.php?f=14&p=54032#p54032

Yes already download and now try the firmware, we will see how after 24hours. Thank You RomanHK for you links

[cyberfrog]

Bad News...,Still Disconect Aftrer 24Hours with gargoyle 1.10 Stable. Arghhhhhh.....

[Lantis]

Seems to be a pretty common problem with USB modems and Openwrt. Suggest using the ping watchdog plugin to watch for a disconnect and restart the network.
Will need a custom script.

Or you can write a script for hotplug.
https://forum.openwrt.org/t/how-to-auto ... nect/16453

[RomanHK]

There are known problems with this USB modem (depending on the number of firmware). Try uploading another modem firmware from here: https://www.lteforum.at/mobilfunk/firmw ... -mod.2691/