Version 1.11.0 : Based on OpenWrt 18.06

[ispyisail]

Try it out

don't like it downgrade

[ViBE]

i noticed something, not sure it is a bug or not. if i remotely try to check out DLNA status the interface redirects me to the local area. for example:

Code: Select all

mygargoyleddns.address.com/minidlna.sh

then click on DLNA status button

Code: Select all

192.168.1.1:8200

is this a normal behaviour?

[Lantis]

Not quite a bug, but not great behaviour either.
I've fixed it now, thanks for reporting.
https://github.com/ericpaulbishop/gargo ... b9eda962f0

[ViBE]

Not quite a bug, but not great behaviour either.
I've fixed it now, thanks for reporting.
https://github.com/ericpaulbishop/gargo ... b9eda962f0

nice. thanks.

[joaomconde]

after upgrading my archer c7 v2 from 10 to 11, i get broken 2.4ghz wireless. 5ghz works, ethernet works. 2.4ghz connected devices say connected but cant connect to the internet. any suggestions?

[ispyisail]

after upgrading my archer c7 v2 from 10 to 11, i get broken 2.4ghz wireless. 5ghz works, ethernet works. 2.4ghz connected devices say connected but cant connect to the internet. any suggestions?

Gargoyle factory reset

you preserved setting on upgrade or used a backup file?

[joaomconde]

Gargoyle factory reset

you preserved setting on upgrade or used a backup file?

No preserved setting, no backup file used. Already factory reset, same problem.. ive tried everything, am out of ideas, any help would be greatly appreciated

[ispyisail]

Gargoyle factory reset

you preserved setting on upgrade or used a backup file?

No preserved setting, no backup file used. Already factory reset, same problem.. ive tried everything, am out of ideas, any help would be greatly appreciated

try

viewtopic.php?f=14&t=12065

or

go back to 1.10 to confirm the problem is with 1.11 and not something else?

[skaox]

Hi,
I have a tl-wr1043nd v1 and I've tried the 1.11.0 (February 2019) and 1.11.X (July 2019) version.

Device Configuration (Gateway) - Internet / WAN (Static IP Wireless) - Wireless Mode (Client).

Just want to report two problems I have with both versions :

System -> USB Storage -> Use Disk As External Root (Extroot)
After reboot no more wireless until I disable Extroot.

Connection -> Ping Watchdog -> Action : Reboot
If I powerdown the internet box no reboot and gargoyle gui (uhttpd) is completely bugged.

That's all for the moment ; A big THANK YOU for this new version.

[romain]

Hi all,

I recently upgraded to 1.11.0 from rc4 and the only issue I had is that it turned on QoS as part of the upgrade. I was getting terrible speeds compared to rc4 (100x to 150x speed loss) which were thankfully solved by just disabling both QoS features.

I have no use for those anyways.

Thanks for the hard work !