hi
i set gargoyle router it work AP WDS wireless
and other routers in other places works repeater or receive wireless from gargoyle
the problem any device connect to repeater router failed obtaining IP some times but if connect gargoyle router direct success obtaining IP
my network component
main router 192.168.1.1 (bridge) cable to wan Ethernet gargoyle router 192.168.3.1 (ap wds)
repeater (1) 192.168.3.50
repeater (2) 192.168.3.8
What solve this problem ?? i am reading in other page gargoyle soft has problem in dchp ? it realy ?
Failed obtaining IP in Repeater Mood
Moderator: Moderators
Re: Failed obtaining IP in Repeater Mood
Smells like your issue is not the main router. DHCP issues with gargoyle/openwrt would hit a lot of people, including developers, so I strongly believe thats not the case.tariqissa wrote: the problem any device connect to repeater router failed obtaining IP some times but if connect gargoyle router direct success obtaining IP
Which brand are your repeaters? I`ve seen this behavior in TPLink ones many many times already.
Last edited by top_s on Sat Jan 19, 2019 6:31 pm, edited 1 time in total.
WDR4300 v1 (stock)
WR941nd v2 (1.9.2)
WA901nd v2 (1.6.2)
2x WR741nd (1.6.2)
(Up to) 1gbps up/down link
WR941nd v2 (1.9.2)
WA901nd v2 (1.6.2)
2x WR741nd (1.6.2)
(Up to) 1gbps up/down link
Re: Failed obtaining IP in Repeater Mood
Yes sear
My main router is tplink 841 v5 and reapeter router also tp link 841 v5
Does changing the router model solve this problem?
My main router is tplink 841 v5 and reapeter router also tp link 841 v5
Does changing the router model solve this problem?
Re: Failed obtaining IP in Repeater Mood
Which firmware version you are using on the repeater?
WDR4300 v1 (stock)
WR941nd v2 (1.9.2)
WA901nd v2 (1.6.2)
2x WR741nd (1.6.2)
(Up to) 1gbps up/down link
WR941nd v2 (1.9.2)
WA901nd v2 (1.6.2)
2x WR741nd (1.6.2)
(Up to) 1gbps up/down link
Re: Failed obtaining IP in Repeater Mood
original firmware from tp link Firmware Version:
3.12.5 Build 100929 Rel.57776n
3.12.5 Build 100929 Rel.57776n
Re: Failed obtaining IP in Repeater Mood
Chage it to gargoyle 1.9.2 or previous. The problem should disappear. Plz report backtariqissa wrote:original firmware from tp link Firmware Version:
3.12.5 Build 100929 Rel.57776n
WDR4300 v1 (stock)
WR941nd v2 (1.9.2)
WA901nd v2 (1.6.2)
2x WR741nd (1.6.2)
(Up to) 1gbps up/down link
WR941nd v2 (1.9.2)
WA901nd v2 (1.6.2)
2x WR741nd (1.6.2)
(Up to) 1gbps up/down link
Re: Failed obtaining IP in Repeater Mood
I did it in last time but the problem was stayed
all repeater changing to gargoyle whithout benifits
Some time good conection and other time faild obtaining ip but if restarting main router it working well
all repeater changing to gargoyle whithout benifits
Some time good conection and other time faild obtaining ip but if restarting main router it working well