Problems flashing DIR-300

[delta_one]

Hey guys,
I'm trying to flash my DIR-300 with Gargoyle, as per the installation instructions. It came with DD-WRT already installed. When I try to flash it with FonFlash, it just says "Non arp received. Make sure, the device is connected directly".
I have it connected directly from the WAN port to the ethernet port of my PC, and the correct network interface is selected. I don't know what to do. Any help would be appreciated.

Thanks.

[DoesItMatter]

Is this the DIR-300 Rev A with the Atheros Chipset?

The DIR-300 Rev B has a RaLink chipset I believe.

Which version do you have - Rev A or Rev B?

If Rev A - you should be able to flash one of the Atheros builds.

I would recommend the AR231X version - 1.2.5 build

If you can't flash via Fon-Flash, you might have to flash via
TFTP server through the redboot prompt.

Also - check this thread for some help:

http://www.gargoyle-router.com/phpbb/vi ... sd=a#p2028