DIR-300 Bricked with Fon Flash

[swizzy]

I had OpenWrt Backfire installed, and tried to use Fon Flash to move to DD-WRT v24.

However all I can see now is LEDs blinking if I connect a cable to LAN/WAN, and that I can't ping to any ip.

Details:
Router: Dlink DIR-300
Last Message: A success message from Fon Flash, saying flash was successful, and router will restart. Strangely the fis create linux command on it took place very fast.
Pings:
Unsuccessful to 192.168.1.1 when connected with 192.168.1.2
Unsuccessful to 192.168.0.1 when connected with 192.168.0.23
Unsuccessful to 192.168.20.81 when connected with 192.168.20.80

Is there anything at I can do, or is it truly bricked?

[swizzy]

Issue was using a general build of Fon Flash.

Do not use the build available on the Gargoyle Downloads page. Instead use http://gargoyle-router.com/experimental ... indows.zip

Pretty much rescued my router, and put DD-WRT svn 14896. Awesome!