Hello.
I have a problem. I think, that BW distribution does not cut speed for Download link. I make rule which shares traffic on 90% and 10% . 10% it is for games, marked by ports.
Then i start torrents he squeeze packets which come for games.
I have to necessitate for limit band Bandwidth for all traffic which excluded in the 10% (games).
I have ADSL, 11.8 Mbit / 0.8 Mb
My router is TP-Link TL-WR841N/ND v8.
Version of Gargoyle 1.10.0
Tell me please, this is all that can be done?
QoS BW Limit
Moderator: Moderators
Re: QoS BW Limit
screen shots please
Re: QoS BW Limit
viewtopic.php?f=5&t=11043
It sounds to me like your setup is not correct. Apply a min bandwidth as well.
Torrents can choke a connection very easily. It is important to manage the upload side as well.
It sounds to me like your setup is not correct. Apply a min bandwidth as well.
Torrents can choke a connection very easily. It is important to manage the upload side as well.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: QoS BW Limit
i checked, when upload is overload, rules work and ping in games dont changed, but download side dont cede marked traffic.Lantis wrote:viewtopic.php?f=5&t=11043
It sounds to me like your setup is not correct. Apply a min bandwidth as well.
Torrents can choke a connection very easily. It is important to manage the upload side as well.
remains to limited for all
Re: QoS BW Limit
Please show screen shot of your upload page while the problem is happening.
Also, on the download page show the ACC section while the problem is happening. Please make sure ACC is enabled and that the ping target is appropriate. Try 8.8.8.8 as your ping target as well.
Also, on the download page show the ACC section while the problem is happening. Please make sure ACC is enabled and that the ping target is appropriate. Try 8.8.8.8 as your ping target as well.
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Re: QoS BW Limit
tell me pls.
how to set priority 7 for hfsc in config qos_gargoyle?
thx
how to set priority 7 for hfsc in config qos_gargoyle?
thx