Hi,
I tried to upgrade the firmware. After upgrade I can't get back into the gargoyle router after enabed WLAN and changed ethernet port to WAN.
I can see the AP on wireless, but I can not get pass the login page. After a while the WLAN light will dim and I can't see the AP anymore.
Is there a way I can reset the Gargoyle router externally with the reset button?
Both LAN and WLAN do not work..
Hardware reset
Moderator: Moderators
Hardware reset
Last edited by ruriruri on Fri Nov 26, 2010 8:19 pm, edited 1 time in total.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Hardware reset
http://www.gargoyle-router.com/phpbb/vi ... =969#p4701
See my post in that thread
What hardware device are you trying to reset?
See my post in that thread
What hardware device are you trying to reset?
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Hardware reset
Gargoyle Router made by Eric. So it's La Fonera.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Hardware reset
I believe Eric did program the reset buttons for those devices.
If you cannot get into the device with a hardware reset, you
could always try and use Fon-Flash to re-flash the device.
That will reset everything back to defaults when you do that.
If you cannot get into the device with a hardware reset, you
could always try and use Fon-Flash to re-flash the device.
That will reset everything back to defaults when you do that.
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Hardware reset
Can you remind me what is the reset procedure that Eric build in?
I have tried holding on to the reset button for a long time.
I haven't try 30/30/30 reset, because I bricked some router before.
I have tried holding on to the reset button for a long time.
I haven't try 30/30/30 reset, because I bricked some router before.
Re: Hardware reset
Is there a proper setup package for FON-flash?
I am missing a lot of dlls and I can't seem to run FON-flash
I am missing a lot of dlls and I can't seem to run FON-flash
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Hardware reset
fon-flash-windows.zip
I just use that version in Windows
Shouldn't need any other DLL's
Just download that, extract, and run - should be 1 executable file
As far as 30-30-30 reset - I thought only some broadcom's bricked
Not sure if any Atheros devices ever bricked with that.
But for Atheros - I think you just need to hold reset for 30 seconds.
I just use that version in Windows
Shouldn't need any other DLL's
Just download that, extract, and run - should be 1 executable file
As far as 30-30-30 reset - I thought only some broadcom's bricked
Not sure if any Atheros devices ever bricked with that.
But for Atheros - I think you just need to hold reset for 30 seconds.
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 12
- Joined: Wed Aug 06, 2014 7:03 am
Re: Hardware reset
thanks for the list guys. it'll really help me.
dubli
dubli