Hello, i upgraded UBNT nanostation m5 to gargoyle firmware but now i would like to put the default firmware back again. How i can do that?
Thx
raigos
Reinstall
Moderator: Moderators
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Reinstall
http://wiki.openwrt.org/toh/ubiquiti/nanostation
Looks like you may have to connect serial and/or access the router
via Redboot and re-flash the firmware through Redboot
Not sure - but you might try Fon-Flash and give that a try
Are you able to get the manufacturer firmware?
Looks like you may have to connect serial and/or access the router
via Redboot and re-flash the firmware through Redboot
Not sure - but you might try Fon-Flash and give that a try
Are you able to get the manufacturer firmware?
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400