1.3.5 Time and DST

[rfdude]

v1.3.5 Asus WL-500GP v1

Check the status of you Gargoyle Status > Bandwidth Usage page. My table is set for Days and Total BW. Today is November 7th and this morning at 02h00 we all turned our clocks back for Standard time. BW Usage Table is incrementing the usage for Nov 6. Seems that the Nov 6th file was not closed. Should be incrementing Nov 7th.

Checked System > Time. The live time shows correctly for Eastern, but the Listed Time Zone is Pacific time. If changed and saved, a refresh will again show Pacific. The NTP servers are default North America. Update frequence every 24 hours, but I think it was found to show every hour when I first checked this in the morning (I'm sure I set it to 24 hours...?).

rf dude

[DoesItMatter]

I'm running 1.3.7 on WZR-HP-G300NH

------------------

Device Name:Gargoyle
Gargoyle Version:1.3.7
Device Configuration:Gateway
Memory Usage:59.2MB / 60.5MB (97.7%)
CPU Load Averages:0.07 / 0.02 / 0.00 (1/5/15 minutes)
Uptime:2 days, 13 hours, 36 minutes
Current Date & Time:11/08/10 00:48 PST

------------------------------

I'm already PST zone though, so not sure if that makes a difference
It looks like it auto-updated the correct time on its own.

Seems to be working here?