@Mitar and alternative,
Is the quota shaping working smoothly on wired and wireless connection?
Thanks.
Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
Moderator: Moderators
-
- Posts: 146
- Joined: Sun Jun 21, 2009 11:27 pm
- Location: Australia
Re: Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
I've testing testing this patch with L7 "HTTP video" filter protocol selected.pbix wrote:Regarding the trouble adding L7 rules.
... The attached should resolve the issue and I would appreciate if you could test it for me....,
Let me know your results.
When I view youtube videos with HTML5 beta enabled the "Bandwidth Maximum" limit works (only for applicable videos of course) . When it is not enabled it doesn't. So my guess is that this filter relies on the <video> tag being present (ie. HTML5).
-
- Posts: 25
- Joined: Tue Oct 12, 2010 7:29 am
Re: Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
Hi all,
I'd like to revert back to stock TP-Link firmware. Is there a guide for this?
Many thanks.
I'd like to revert back to stock TP-Link firmware. Is there a guide for this?
Many thanks.
Re: Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
Getting back on topic... Just tested it, copied the file over with scp, (made a backup of the original) - but I still get the error saying that (There is an error in application (layer 7) protocol. Could not update the rule)
Edit: oops, my bad! Forgot that IE caches javascript!
Another issue... time seems to revert to UTC-8... also, when choosing servers it doesnt update (at least, not on the spot). Do I need to wait an hour?
M.
Edit: oops, my bad! Forgot that IE caches javascript!
Another issue... time seems to revert to UTC-8... also, when choosing servers it doesnt update (at least, not on the spot). Do I need to wait an hour?
M.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
If you have errors with settings not saving:
1) reset to defaults
or
2) reflash and re-configure from scratch
Don't reload an old config, something may be corrupted.
As far as time not syncing - reboot the router and then check.
1) reset to defaults
or
2) reflash and re-configure from scratch
Don't reload an old config, something may be corrupted.
As far as time not syncing - reboot the router and then check.


2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
Mitar how did you install gargoyle? Did you use a ready-made image?
Re: Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
Thanks for the response... still having issues though... a reboot didn't help...
Trying to reflash, but it doesn't actually reflash the unit. It just sits there telling me that its updating the firmware...
Or do I need to flash it via tftp? Does the web-interface update firmware not work for everyone, or is it just me?
M.
Trying to reflash, but it doesn't actually reflash the unit. It just sits there telling me that its updating the firmware...
Or do I need to flash it via tftp? Does the web-interface update firmware not work for everyone, or is it just me?
M.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Gargoyle 1.35 & Tp-Link TL-WR1043ND Bugs
Try re-uploading via TFTP
For a full complete flash/erase, I usually flash another firmware
(like dd-wrt or the factory firmware) then re-flash Gargoyle.
But yea - try a TFTP flash
For a full complete flash/erase, I usually flash another firmware
(like dd-wrt or the factory firmware) then re-flash Gargoyle.
But yea - try a TFTP flash


2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400