V1.9.X Timezone problem

If your problem doesn't fall into one of the other categories, report it here.

Moderator: Moderators

Post Reply
Beavis
Posts: 8
Joined: Thu Dec 01, 2016 7:23 am

V1.9.X Timezone problem

Post by Beavis »

Hello guys.
I managed to install Gargoyle on a TL-WR1043N/ND v3 (by installing OpenWrt first then switching to Gargoyle).
Almost everything is running fine, wireless, quota limits etc...

The only problem is time(zone). I am using central europe timezone (UTC+1) but to get the correct time I have to set the timezone to UTC+4 (Armenia!).
NTP servers are accessible and machines behind the router update correctly. Gargoyle "minutes" and "seconds" are also correct but the timezone I had to set is really odd.

Where should I start to troubleshoot the problem?

Best Regards.

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: V1.9.X Timezone problem

Post by Lantis »

Just set both UTC+1 and UTC+4 timezones, and times were accurate to what timeanddate.com showed the current time in "European Central Time" was.

What exact location are you in? I know this sounds stupid, but are you certain you're in CET? lol.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Beavis
Posts: 8
Joined: Thu Dec 01, 2016 7:23 am

Re: V1.9.X Timezone problem

Post by Beavis »

Hello
I am at UTC+1 and all my devices are syncronized correctly, except for Gargoyle that shows the right time only setting it to UTC+4 (now it's winter here and the DST is disabled too).

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: V1.9.X Timezone problem

Post by Lantis »

You still haven't told me where you are.

I'm unable to reproduce this issue, and no one else has reported similar.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Beavis
Posts: 8
Joined: Thu Dec 01, 2016 7:23 am

Re: V1.9.X Timezone problem

Post by Beavis »

I am in Italy now... sorry not to have answered you before..
I know it is a strange problem. I did not find any traces of similiar problems on forum

Best Regards

Beavis
Posts: 8
Joined: Thu Dec 01, 2016 7:23 am

Re: V1.9.X Timezone problem

Post by Beavis »

Solved. It was a dns problem. In my config the dns is downstream the gargoyle and the dns received from the gargoyle were not working.
The gargoyle did NOT have problems.
Thanks anyway. Best regards

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: V1.9.X Timezone problem

Post by Lantis »

Thanks for letting us know
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply