A simple but Not I did it config.

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
iincitr
Posts: 36
Joined: Sun Sep 13, 2015 9:20 am
Location: turkey

A simple but Not I did it config.

Post by iincitr »

Hi all

I am using Gargoyle Router Interface for 3 years and I am very happy it. :D

But there is a config that is I can not cover it.

My VDSL + IPTV BOX + Gargoyle Device config as follow.


From ISP I have VDSL Internet service and plus IPTV service.

The IPTV service has diffrent VLAN like below.

# Enable Name Type Mode Encapsulation 802.1p / VPI 802.1q / VCI IGMP Proxy NAT Default Gateway IPv6 MLD Proxy Modify
1 Y MyISP_ADSL ATM Routing PPPoE 8 35 N Y Y N N
2 Y iptv_ADSL ATM Routing IPoE 8 55 Y Y N N N


Gargoyle BOX just behing one of the Ethernet PORT of the VDSL Modem.( 4 port on it. ) The IPTV is connected the other ethernet port which one of the 4 port interface.

Modem has interrnal network : 192.168.0.1 255.255.255.0
IPTV get ip from the above class ip Say : 192.168.0.2

IPTV box connect TV cannels like rtp://239.254.1.x format.

When I connect the VDSL wifi I can use VideoLAN applicatin get the streaming ok.

But I cannot configure the gargoyle BOX.

Gorgoyle BOX IP : 192.168.1.1

I want to connect the gargoyle box wifi and get the stream from rtp://239.254.1.x

How can I configure it.

Thank you
Tp-link 1043ND v1.8 gargoyle 1.11.x thank you

Buffalo AirStation WZR-600DHP DD-WRT last version

High Speed Boadband Internet

Lantis
Moderator
Posts: 7063
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: A simple but Not I did it config.

Post by Lantis »

Can you access the modem from the gargoyle network?
Sounds like you need to set a static route.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

iincitr
Posts: 36
Joined: Sun Sep 13, 2015 9:20 am
Location: turkey

Re: A simple but Not I did it config.

Post by iincitr »

Lantis wrote:Can you access the modem from the gargoyle network?
Sounds like you need to set a static route.
Yes sure
Tp-link 1043ND v1.8 gargoyle 1.11.x thank you

Buffalo AirStation WZR-600DHP DD-WRT last version

High Speed Boadband Internet

iincitr
Posts: 36
Joined: Sun Sep 13, 2015 9:20 am
Location: turkey

Re: A simple but Not I did it config.

Post by iincitr »

Yes I can reach from gargoyle box network to VDSL network by means of ping and http ( VDSLmodem interface )
Tp-link 1043ND v1.8 gargoyle 1.11.x thank you

Buffalo AirStation WZR-600DHP DD-WRT last version

High Speed Boadband Internet

Lantis
Moderator
Posts: 7063
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: A simple but Not I did it config.

Post by Lantis »

Then you should be able to access the iptv box by the same logic.
So what doesn't work?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

iincitr
Posts: 36
Joined: Sun Sep 13, 2015 9:20 am
Location: turkey

Re: A simple but Not I did it config.

Post by iincitr »

That is I can not understand.

I can not get stream from (example) rtp://239.254.1.155.

When I connect to VDSL wifi there is no problem.

Bu if I connect to gargoyle box wifi then call the above rpt://... no work.

I can not understant.

Again

VDSL has 192.168.0.1 IP
IPBOX has 192.168.0.2 IP
Gargoyle BOX 192.168.0.3 Wan side . 192.168.1.1 WIFI / LAN side.

Gargoyle box wan side connected to VDSL 4 port ethernet sw and gets IP from VDSL DHCP (192.168.0.3)
Tp-link 1043ND v1.8 gargoyle 1.11.x thank you

Buffalo AirStation WZR-600DHP DD-WRT last version

High Speed Boadband Internet

Lantis
Moderator
Posts: 7063
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: A simple but Not I did it config.

Post by Lantis »

Sounds like you may need to do a bit of manual configuration.
https://wiki.openwrt.org/doc/howto/udp_multicast
udpxy looks to be the easiest to set up.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

iincitr
Posts: 36
Joined: Sun Sep 13, 2015 9:20 am
Location: turkey

Re: A simple but Not I did it config.

Post by iincitr »

I got the point.

I will try it.

Thank you for your help.
Tp-link 1043ND v1.8 gargoyle 1.11.x thank you

Buffalo AirStation WZR-600DHP DD-WRT last version

High Speed Boadband Internet

Post Reply