Access point no wan connection

[probinso]

Gidday Lantis here is a new log and dmsg
https://www.dropbox.com/s/z34p7nkvkxgfc ... .docx?dl=0
https://www.dropbox.com/s/vwviwezivrbsb ... .docx?dl=0

[Lantis]

I can't see anything obviously wrong.
I can only suggest upgrading to 1.9.1 and trying again however I can't offer any guarantees and am out of ideas.

[probinso]

Problem solved took cover off found hidden wan port. For some reason the manufacturer only had it setup for Lan connection.

[probinso]

Thanks for the help last time Eric after finally getting connection established. The link keeps dropping out at the bridge end. I have internet and ssid at the AP When the config page of the bridge looks ok to me I have posted screen shots. I am unsure if I should disable DHCP at the gateway,I am using pppoe to connect to the NBN fixed wireless modem (NTD).
Any help would be appreciated.https://www.dropbox.com/s/x60j36jt4eln6 ... d.png?dl=0
https://www.dropbox.com/s/dwgcjwfkyv79n ... s.png?dl=0

[Lantis]

The IP needs to be outside the bridge subnet (it says right there).
Leave DHCP on the gateway.