gargoyle-ispy 2016-May-02 10:49.torrent

[ispyisail]

USE AT YOUR OWN RISK

gargoyle-ispy 2016-May-02 10:49.torrent
https://goo.gl/T1QH0H


magnet:?xt=urn:btih:49b0abc0b9d52d88560741489d7d545bf1fc66a9&dn=gargoyle-ispy%202016-May-02%2010_49.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969


Routers
https://goo.gl/lfUVJ6

Fix Samba Makefile to treat smbpasswd as a config file

Bump Openwrt to fix WR841 images. Add wr1043nd v3 to build list

[Lantis]

@all,

This brings back the wr841 images that were missing from the last one.
It also adds in the wr1043nd V3.
I'd appreciate anyone testing that v3 image as the last one that was sent out to people was a dud.

[tapper]

Goint to test this on the c7 to to see if it will bring back my 5ghz.

[tapper]

No 5 ghz with the c7 v2 and my webinterface is all messed up. I flashed without saving settings. This c7 is starting to piss me off.

[daniel3x]

I was trying to update my TP-Link 1043ND with preserved settings and bricked my device. No sys light.

Already saw this happen to other user on april 22 build:

http://www.gargoyle-router.com/phpbb/vi ... 637#p37705

Something is not ok with this latest builds on tp-link 1043nd v1

Anyone has some ideas to bring back my router to life? I can't enter into safemode either.

Thanks in advance.

[Lantis]

Have you tried built in tftp?

[daniel3x]

Have you tried built in tftp?

I tried but nothing. My router is v1.10. I got lan ports working and power light only.

Here is what i tried with tftp:
I changed my ip adress to 192.168.0.66 (my router ip was 192.168.0.1)
Then I open "tftpd by Jounin" and power up my router, but don't happen anything. Maybe I need to do some subquence when power up the router?

UPDATE: after a lot of tries I finally unbrick my router using tftp.
Please look at this issue DEVS

Thanks and keep the great work on developing guys
Cheers

[n8b]

Patched TL-WDR3600 from 20160421 to this build.
Preserved settings.
No problems.
Only a small issue. I have a 4G USB modem (Huawei E3372) attached that gives me internet. Nothing connected in WAN port.
Still Connection | Basic says DHCP (Wired). It should say USB Modem (HiLink, RNDIS). I have tried to select USB Modem and save but it stil displays DHCP (Wired).
The 4G connection works and correct WAN adress is displayed. Only type is displayed wrong.

[giaretos]

Hi,

at least for me ddns service no-ip.com is not working anymore.
I went back to 17/02 firmware and it worked again.

I tried both restoring my "old" conf and setting it up again, with no success.

[lceron80]

ddns is not working anymore with this build in any of my routers...