Bricked my Archer C7
Moderator: Moderators
-
- Posts: 5
- Joined: Thu Apr 14, 2016 6:42 pm
Re: Bricked my Archer C7
Hi Lantis
The new patched version of firmware worked fine on my router. Thank you for this.
Quick question on backup config file. I have a backed up config file with all the firewall and quota settings etc. from my old router tplink (wdr3600). It was running Gargoyle 1.8.0 before it crashed Will it work if I restore it on my new tplink Archer c 7 router ?
Thanks again for all your assistance.
The new patched version of firmware worked fine on my router. Thank you for this.
Quick question on backup config file. I have a backed up config file with all the firewall and quota settings etc. from my old router tplink (wdr3600). It was running Gargoyle 1.8.0 before it crashed Will it work if I restore it on my new tplink Archer c 7 router ?
Thanks again for all your assistance.
Re: Bricked my Archer C7
You could probably manually restore the quota one, but I think the firewall one will cause a problem.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Bricked my Archer C7
Is there a way to know for sure which version you have? I recently purchased two C7s from Amazon Warehouse Deals and they appear to be unused but I still have no idea how old they are. Does the new patched version work with older Archer C7 v2 routers as well?
Re: Bricked my Archer C7
yes it does. manufacture date will probably tell you. first reports of the new flash chip were late 2015.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
-
- Posts: 113
- Joined: Wed Mar 09, 2011 3:12 am
Re: Bricked my Archer C7
What new firmware are you talking about? 1.8.1, 1.9.0flehir wrote:the new firmware worked for me .... Thanks
I read the whole thread but it's not clear to me what people are using right now. I bought my C7 V2 at Thanksgiving 2015. I'm thinking that I have the new flash chip as well...
Thanks!
Netgear WNDR3700V2 Gargoyle 1.10.0
TP-LINK Archer C7 v4 Gargoyle 1.12
TP-LINK Archer C7 v4 Gargoyle 1.12
Re: Bricked my Archer C7
http://lantisproject.com/gargoyle_custo ... ChipPatch/Trailblazer wrote:What new firmware are you talking about? 1.8.1, 1.9.0flehir wrote:the new firmware worked for me .... Thanks
I read the whole thread but it's not clear to me what people are using right now. I bought my C7 V2 at Thanksgiving 2015. I'm thinking that I have the new flash chip as well...
Thanks!
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
-
- Posts: 113
- Joined: Wed Mar 09, 2011 3:12 am
Re: Bricked my Archer C7
Thanks, Lantis. Is Eric still heading up the project? I don't see any recent builds. I was using this several years ago for a specific purpose and it worked flawlessly. Looking forward to implementing it again on my C7 V2.Lantis wrote:http://lantisproject.com/gargoyle_custo ... ChipPatch/Trailblazer wrote:What new firmware are you talking about? 1.8.1, 1.9.0flehir wrote:the new firmware worked for me .... Thanks
Netgear WNDR3700V2 Gargoyle 1.10.0
TP-LINK Archer C7 v4 Gargoyle 1.12
TP-LINK Archer C7 v4 Gargoyle 1.12
Re: Bricked my Archer C7
Is it ok to buy an "Archer C7" now?
I want to run Gargoyle so was going to pick the Archer C7...just checking if this is OK to get? Or whether I should look at a different model? (if yes, any recommendation)
I want to run Gargoyle so was going to pick the Archer C7...just checking if this is OK to get? Or whether I should look at a different model? (if yes, any recommendation)
Re: Bricked my Archer C7
Eric is still the lead yes. I just contribute in my free time to lend a hand.
Eric only releases the major versions (1.8.0,1.8.1,1.9.0 etc). In between those builds lots of code changes happen, and minor releases are taken care of by myself (small one offs for testing specific problems) or ispyisail who does larger scale minor builds.
Yes the Archer is a safe purchase. I don't own one, but they are good value for money. I'm actually thinking of picking one up because they are so popular just so I can test things on it.
This fix has been implemented into the latest code (and ispyisail release). It's also been back ported to the openwrt release we are based on, so all that hard work for nothing haha.
Eric only releases the major versions (1.8.0,1.8.1,1.9.0 etc). In between those builds lots of code changes happen, and minor releases are taken care of by myself (small one offs for testing specific problems) or ispyisail who does larger scale minor builds.
Yes the Archer is a safe purchase. I don't own one, but they are good value for money. I'm actually thinking of picking one up because they are so popular just so I can test things on it.
This fix has been implemented into the latest code (and ispyisail release). It's also been back ported to the openwrt release we are based on, so all that hard work for nothing haha.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Bricked my Archer C7
I saw that alsoThis fix has been implemented into the latest code (and ispyisail release). It's also been back ported to the openwrt release we are based on, so all that hard work for nothing haha.