WR741 Not Saving changes

If your problem doesn't fall into one of the other categories, report it here.

Moderator: Moderators

WeWe
Posts: 27
Joined: Fri Jun 14, 2013 4:12 pm

WR741 Not Saving changes

Post by WeWe »

my router doesn't save my changes
i tried this command without success

Code: Select all

mtd unlock rootfs_data
i also tried to flash it with the default firmware and install gargoyle again but i got the same problem

here is my logread

Code: Select all

Mon Feb  1 07:20:59 2016 daemon.info dnsmasq-dhcp[7038]: DHCPREQUEST(br-lan) 192.168.1.27 50:f0:d3:46:7c:f4 
Mon Feb  1 07:20:59 2016 daemon.info dnsmasq-dhcp[7038]: DHCPACK(br-lan) 192.168.1.27 50:f0:d3:46:7c:f4 Gyoshy-T
Mon Feb  1 07:22:54 2016 daemon.info hostapd: wlan0: STA c4:e9:84:13:6c:a4 WPA: group key handshake completed (RSN)
Mon Feb  1 07:27:07 2016 daemon.info hostapd: wlan0: STA 74:e5:0b:8e:90:46 IEEE 802.11: authenticated
Mon Feb  1 07:27:07 2016 daemon.info hostapd: wlan0: STA 74:e5:0b:8e:90:46 IEEE 802.11: associated (aid 2)
Mon Feb  1 07:27:07 2016 daemon.info hostapd: wlan0: STA 74:e5:0b:8e:90:46 WPA: pairwise key handshake completed (RSN)
Mon Feb  1 07:27:07 2016 daemon.info dnsmasq-dhcp[7038]: DHCPREQUEST(br-lan) 192.168.1.6 74:e5:0b:8e:90:46 
Mon Feb  1 07:27:07 2016 daemon.info dnsmasq-dhcp[7038]: DHCPACK(br-lan) 192.168.1.6 74:e5:0b:8e:90:46 WeWe-Lap-W
Mon Feb  1 07:27:07 2016 daemon.info dnsmasq-dhcp[7038]: DHCPREQUEST(br-lan) 192.168.1.6 74:e5:0b:8e:90:46 
Mon Feb  1 07:27:07 2016 daemon.info dnsmasq-dhcp[7038]: DHCPACK(br-lan) 192.168.1.6 74:e5:0b:8e:90:46 WeWe-Lap-W
Mon Feb  1 07:32:54 2016 daemon.info hostapd: wlan0: STA 74:e5:0b:8e:90:46 WPA: group key handshake completed (RSN)
Mon Feb  1 07:32:54 2016 daemon.info hostapd: wlan0: STA c4:e9:84:13:6c:a4 WPA: group key handshake completed (RSN)
Mon Feb  1 07:34:28 2016 daemon.info ddns_gargoyle[1044]: Checking whether update needed:
Mon Feb  1 07:34:28 2016 daemon.info ddns_gargoyle[1044]: 	service provider=no-ip.com
Mon Feb  1 07:34:28 2016 daemon.info ddns_gargoyle[1044]: 	domain=mwewe.no-ip.biz
Mon Feb  1 07:34:28 2016 daemon.info ddns_gargoyle[1044]: 		Could not determine local ip from url: http://www.selfseo.com/what_is_my_ip.php
Mon Feb  1 07:34:29 2016 daemon.info ddns_gargoyle[1044]: 		Successfully retrieved local ip from url: http://aruljohn.com
Mon Feb  1 07:34:29 2016 daemon.info ddns_gargoyle[1044]: 	local IP  = 156.197.168.63
Mon Feb  1 07:34:29 2016 daemon.info ddns_gargoyle[1044]: 	remote IP = 156.197.168.63
Mon Feb  1 07:34:29 2016 daemon.info ddns_gargoyle[1044]: 	Update not needed, IPs match

Lantis
Moderator
Posts: 6794
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: WR741 Not Saving changes

Post by Lantis »

Gargoyle version?
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

WeWe
Posts: 27
Joined: Fri Jun 14, 2013 4:12 pm

Re: WR741 Not Saving changes

Post by WeWe »

it happens in all those versions
1.6.2
1.7.0
1.8.1 on it now
1.9.0

nworbnhoj
Posts: 916
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: WR741 Not Saving changes

Post by nworbnhoj »

Can you never save anything in any of those versions!? Or is it intermittent? When I have had trouble saving settings it is because my session has expired - just need to loin again
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

WeWe
Posts: 27
Joined: Fri Jun 14, 2013 4:12 pm

Re: WR741 Not Saving changes

Post by WeWe »

no i was able to save my settings before my 2nd or 3rd restart after that i cant change any thing the only way to be able to make it work again is to rest or reflash it

nworbnhoj
Posts: 916
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: WR741 Not Saving changes

Post by nworbnhoj »

Did you install plugins? which ones?
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

WeWe
Posts: 27
Joined: Fri Jun 14, 2013 4:12 pm

Re: WR741 Not Saving changes

Post by WeWe »

logread only

nworbnhoj
Posts: 916
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: WR741 Not Saving changes

Post by nworbnhoj »

I can only think that you have a hardware problem.

https://wiki.openwrt.org/toh/tp-link/tl-wr741nd
Chinese models may differ - TP-Link appear to have started using vxWorks and reducing the flash to 2MB and RAM to 16MB on some of their newer versions for the Chinese market.

Could this apply to your device? What version do you have?
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

WeWe
Posts: 27
Joined: Fri Jun 14, 2013 4:12 pm

Re: WR741 Not Saving changes

Post by WeWe »

my version 2.4
sorry for asking a non related question
can i use those mods with gargoyle

1- 64 or 32 mb flash mod
https://forum.openwrt.org/viewtopic.php ... =3&login=1

2- usb mod
https://wiki.openwrt.org/toh/tp-link/tl-wr741nd
Last edited by WeWe on Sat Feb 06, 2016 4:46 am, edited 1 time in total.

Lantis
Moderator
Posts: 6794
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: WR741 Not Saving changes

Post by Lantis »

Downgrade to 1.6.2 and test thoroughly. This is more than likely a flash size problem.
1.6.2 should be fine...
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply