Hi Guys
How do you install Gargoyle on a router that has Open WRT 15.05 ?
The router is a TP-Link WR841N v10 that I have Open WRT working on succesfully
WR841Nv10 does not have an official Gargoyle release yet so I am trying to see if the v9 release will load into it
I have tried the Gargoyle WR8421v9 thru Luci but it wont load, comes back with " The uploaded image file does not contain a supported format" when I try to load to load the (gargolyversion)-sysupgrade.bin file. Have tried both the factory.bin sysupgrade.bin without luck.
Have tried renaming etc but no luck...
Any ideas....any help would be appreciated
Open WRT --> Gargoyle TP-WR841v10
Moderator: Moderators
-
- Posts: 14
- Joined: Wed Feb 03, 2016 8:51 pm
- Location: Nth NSW, Australia
Open WRT --> Gargoyle TP-WR841v10
Brewer of Beer
Driver of a Morris Minor Ute
User of Linux
Installer of Asterisk
Comms Tech for many years
Driver of a Morris Minor Ute
User of Linux
Installer of Asterisk
Comms Tech for many years
Re: Open WRT --> Gargoyle TP-WR841v10
Keep trying, and if you get lucky you will end up with a brickDucatiboy Stu wrote:I have tried the Gargoyle WR8421v9 thru Luci but it wont load
-
- Posts: 14
- Joined: Wed Feb 03, 2016 8:51 pm
- Location: Nth NSW, Australia
Re: Open WRT --> Gargoyle TP-WR841v10
MMm...A brick....well I suppose I could start to build a house with them
So basically until there is a Gargoyle v10 for this WR841 I will spend much time pulling hair and using bad language..
Which is strange as the open WRT works fine on it and I would have thought that Gargoyle would be able to work over the top of open WRT.
I have V8 & v9 of the WR841 on Gargoyle and they are fine ( althought this was a straight from factory --> Gargoyle flash )
So basically until there is a Gargoyle v10 for this WR841 I will spend much time pulling hair and using bad language..
Which is strange as the open WRT works fine on it and I would have thought that Gargoyle would be able to work over the top of open WRT.
I have V8 & v9 of the WR841 on Gargoyle and they are fine ( althought this was a straight from factory --> Gargoyle flash )
Brewer of Beer
Driver of a Morris Minor Ute
User of Linux
Installer of Asterisk
Comms Tech for many years
Driver of a Morris Minor Ute
User of Linux
Installer of Asterisk
Comms Tech for many years
Re: Open WRT --> Gargoyle TP-WR841v10
This is a build-in protection to stop idiots like you from bricking the router from flashing incompatible ROM.Ducatiboy Stu wrote: WR841Nv10 does not have an official Gargoyle release yet so I am trying to see if the v9 release will load into it
I have tried the Gargoyle WR8421v9 thru Luci but it wont load, comes back with " The uploaded image file does not contain a supported format" when I try to load to load the (gargolyversion)-sysupgrade.bin file. Have tried both the factory.bin sysupgrade.bin without luck.
Eric Wong
PM me if you need to buy Gargoyle router in Australia/NZ, willing to pay me to help you on your Gargoyle configurations or build custom configured ROM with pre-installed app or try to fix your bricked router. Yes, I am looking for job/work.
PM me if you need to buy Gargoyle router in Australia/NZ, willing to pay me to help you on your Gargoyle configurations or build custom configured ROM with pre-installed app or try to fix your bricked router. Yes, I am looking for job/work.
-
- Posts: 14
- Joined: Wed Feb 03, 2016 8:51 pm
- Location: Nth NSW, Australia
Re: Open WRT --> Gargoyle TP-WR841v10
Well that does make a lot of sense, I just thought there may have been a slim chance that it could workericwong wrote: This is a build-in protection to stop idiots like you from bricking the router from flashing incompatible ROM.
Brewer of Beer
Driver of a Morris Minor Ute
User of Linux
Installer of Asterisk
Comms Tech for many years
Driver of a Morris Minor Ute
User of Linux
Installer of Asterisk
Comms Tech for many years
Re: Open WRT --> Gargoyle TP-WR841v10
I'm here to be the bearer of other bad news, but it's looking like we won't be doing 4MB routers, so support for the V10 is looking not good.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Open WRT --> Gargoyle TP-WR841v10
as you have posted in Feature RequestLantis wrote:I'm here to be the bearer of other bad news, but it's looking like we won't be doing 4MB routers, so support for the V10 is looking not good.
I will no longer be accepting requests for routers with 4MB of flash. The images no longer reliably fit into this size and it is a counterproductive use of my time and yours.