Hello, I ran out of address reservation space on a tp-link tl-wr1043nd v1 with stock firmware.
How many can be used here?
Also wanted to be safe from netusb vulnerability, and found gargoyle while researching dd-wrt, tomato, etc.
Nice site
Maximum number of address reservations on tp-link wr1043nmv1
Moderator: Moderators
Re: Maximum number of address reservations on tp-link wr1043
I cannot find any reference to NetUSB.ko within OpenWRT
I do not know of any limitations in OpenWRT to the number of static addresses able to be reserved (if this is your question?).
I do not know of any limitations in OpenWRT to the number of static addresses able to be reserved (if this is your question?).
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Re: Maximum number of address reservations on tp-link wr1043
Thanks for the prompt reply.
I was about to replace a couple wr1043nm v1 because of the usb vulnerability but wanted to dd-wr and others first.
Also what kicked me forward was failure of one unit.
I replaced the electrolytic capacitors in one unit, and with Gargoyle, looks like it will solve all problems, especially with traffic handling.
Was I surprised when I went to the Gargoyle store to look at pre loaded hardware and found it was 1043's, thought they were way over end of life no matter what firmware.
Now to re-cap the other one and maybe heat sink hot parts.
Thanks again,
I'll report back if i can get over 26 reserved machines with Gargoyle.
P.S.
Where's your 'donate" button? (edit: found it)
I was about to replace a couple wr1043nm v1 because of the usb vulnerability but wanted to dd-wr and others first.
Also what kicked me forward was failure of one unit.
I replaced the electrolytic capacitors in one unit, and with Gargoyle, looks like it will solve all problems, especially with traffic handling.
Was I surprised when I went to the Gargoyle store to look at pre loaded hardware and found it was 1043's, thought they were way over end of life no matter what firmware.
Now to re-cap the other one and maybe heat sink hot parts.
Thanks again,
I'll report back if i can get over 26 reserved machines with Gargoyle.
P.S.
Where's your 'donate" button? (edit: found it)
Re: Maximum number of address reservations on tp-link wr1043
Be hearing back from you soon then!jh15 wrote:I'll report back if i can get over 26 reserved machines with Gargoyle.
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Re: Maximum number of address reservations on tp-link wr1043
I have 41 devices with static IPs
Linksys WRT3200ACM
NETGEAR Nighthawk R7800
NETGEAR R6260
NETGEAR Nighthawk R7800
NETGEAR R6260