How to back Gargoyle?

[Doky]

Hi!

TP-Link 1043ND V2 flashed V3 software..
How to back Gargoyle soft?

[nworbnhoj]

Sorry, I am not clear about your question

Are you having trouble returning to the correct software for the V2? If you cannot simply reflash with the correct Gargoyle image then you may have to use on of the recovery methods.
http://www.gargoyle-router.com/wiki/dok ... e_recovery

[Doky]

Sorry, I am not clear about your question

Are you having trouble returning to the correct software for the V2? If you cannot simply reflash with the correct Gargoyle image then you may have to use on of the recovery methods.
http://www.gargoyle-router.com/wiki/dok ... e_recovery

I have TP-Link 1043ND V2!
Flashed V3 TP-Link Original Software!

How to back flash Gargoyle FW?

[nworbnhoj]

I have TP-Link 1043ND V2!
Flashed V3 TP-Link Original Software!

How to back flash Gargoyle FW?

Ahhh - now I understand. That is an interesting problem.

If the V3 TP-Link Original Software actually runs then you might be able to Flash to Gargoyle with .....ar71xx-generic-tl-wr1043nd-v2-squashfs-factory.bin

Otherwise I am guessing that you will need to use a serial cable to recover.