Just installed Gargoyle on my TPLINK AC1750 and tried to set up as a wireless adapter. I was able to scan and find my WIFI and enter password. Now I cannot even access gargoyle software or my WIFI via my TPLINK. Not sure if I can revert back to original firmware or how to even access my router. I'm not very savy with technology, was just trying to use my TPLINK as a faster wireless adapter than a USB plug in. I have ATT Uverse which uses a "modem" and a WAP. Any Help out there?
Thanks
TPLINK AC1750 failure
Moderator: Moderators
Re: TPLINK AC1750 failure
If you can still access via an Ethernet cable then you can fix it easily.
Otherwise if it is inaccessible you'll need to do a failsafe reset.
Otherwise if it is inaccessible you'll need to do a failsafe reset.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
https://lantisproject.com/blog
Please be respectful when posting. I do this in my free time on a volunteer basis.
https://lantisproject.com/blog
Re: TPLINK AC1750 failure
How is a "fail safe reset" done?
thanks
thanks
Re: TPLINK AC1750 failure
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
https://lantisproject.com/blog
Please be respectful when posting. I do this in my free time on a volunteer basis.
https://lantisproject.com/blog