gargoyle-ispy 2015-October-28 15:55.torrent

[ispyisail]

USE AT YOUR OWN RISK


gargoyle-ispy 2015-October-28 15:55.torrent
https://goo.gl/GgkVOU

Routers
https://goo.gl/WSWRws

Extra "a"
No need for extra a in element.

fix arpnat patch

[krzyko]

fix arpnat patch

Was this added to fix switch problems I am observing since first CC build?

The core of my problem is that wireless clients connected to TL-WR941NDv3 (which functions as an AP connected using the LAN port to the main router), from time to time (a few times every hour) lose outbound connectivity (wireless client cannot ping anything but this AP) while said AP still connects to other devices (you can log into AP and successfully issue ping commands to other local or remote hosts).

[shm0]

Flashed few hours ago.
Runs as good as last build for me.
Thank you!

[tapper]

Flashed to wdr3600 all is fine thanks

[ghostja]

is:issue is:open

device: tp-link tl-wr841n V7

version: gargoyle-ispy 2015-October-28 15:55

when Web Usage(Web Monitor Preferences) is enable, it record history.

when router reboot , it do not record history any more. we must click reset and clear history, it will be record history again.

1.8.0 has this issue also.

[Volaris]

Seems to be working fine on my Buffalo WZR-HP-G300NH2.

Just two things I've noticed.



Connections seem kinda high. I know this was mentioned a few releases ago but not sure if they were supposed to be fixed since then?



Is 512/1024 normal? I think I've seen 10000 in other Gargoyle routers. Either way, what should be the default numbers there?

[chojny65]

or on the archer C7 V2 anyone can check already?

[coits]

On my WZR-HP-AG300H running gargoyle firmware 1.7.2, max. connection is 4096, I usually put TCP Timeout:300 and UDP timeout:180 on my router.

On my Archer C7 v2 running 1.9.x build, max connection info are all the same as your WZR-HP-G300NH2.

Thanks,
Coits

[Lantis]

Seems to be working fine on my Buffalo WZR-HP-G300NH2.

Just two things I've noticed.

---SNIP---

Connections seem kinda high. I know this was mentioned a few releases ago but not sure if they were supposed to be fixed since then?

---SNIP---

Is 512/1024 normal? I think I've seen 10000 in other Gargoyle routers. Either way, what should be the default numbers there?

I have updated the patch for this to suit the new version. I'm not sure if Eric intentionally left it out or he overlooked it. We should know in a few days.
https://github.com/ericpaulbishop/gargoyle/pull/386

EDIT: will be included in next version.