gargoyle-ispy 2015-October-12 18:41.torrent

[doug_porsche]

Running on an Archer C7, 5Ghz is a little flaky (use it mainly with AppleTV). The firmware-5.bin in latest OpenWRT snapshots works better. Hopefully this makes its way to Gargoyle soon.

Also have installed on TP-Link WDR3600, no issues.

This is weird, because on current stable 1.80 I'm having weird issue's with my Macbook and 5Ghz. I also have WDR3600. Do you have any weird issues with 5ghz on this device + any apple devices with the wdr3600?

I wasn't using the WiFi on the WDR3600 (very limited testing) so I can't say for sure, but it was fairly stable when I did try it out.

running code release on my NETGEAR WNDR3700v2 and not having any issues with the WiFi (use both 5GHz and the 2.4GHz daily)

[scrmtrey]

I will flash this fw this weekend. Hope that all features are working ok.

Is it stable ?

[coits]

Hi All,

Does anybody install this build on TP-Link Archer C7 v2 router.
Does the wireless 2.4 and 5G stable on this build, please advise.

Thank you all.

[Tetragammaton]

i have 2 TPLink 841N routers both are version 9 and using 1.9.x. I try to use Wireless Repeater mode but unluckily it didn't work. The repeater router cannot be access through lan and wlan. While connecting to its wifi, it is stuck to "obtaining ip address" and it will not connect. i check the settings that i have set and i saw that wireless n+g+b dont save. it is auto saving to g+b only. i revert back to latest 1.8.x and it is working. please include fix for this bug in the next build. Thank you.

[francisuk1989]

I will flash this fw this weekend. Hope that all features are working ok.

Is it stable ?

tp-link tl-wdr3600 flashed and working great.

Im using QoS, Port forwarding, No UPnP, 5GHz disabled as i have no use, THis is all working great.

Status
Device Name:GW
Gargoyle Version:1.9.X (Built 20151011-1810 git@a5c027b)
Model:TP-Link TL-WDR3600 v1
Device Configuration:Gateway
Memory Usage:19.1MB / 123.1MB (15.5%)
Connections:101/16384
CPU Load Averages:0.00 / 0.01 / 0.05 (1/5/15 minutes)
Uptime:2 days, 18 hours, 50 minutes
Current Date & Time:16/10/2015 14:06 BST

[scrmtrey]

Nice. Thank you for your reply.

[b0xBR]

I will flash this fw this weekend. Hope that all features are working ok.

Is it stable ?

tp-link tl-wdr3600 flashed and working great.

Im using QoS, Port forwarding, No UPnP, 5GHz disabled as i have no use, THis is all working great.

Status
Device Name:GW
Gargoyle Version:1.9.X (Built 20151011-1810 git@a5c027b)
Model:TP-Link TL-WDR3600 v1
Device Configuration:Gateway
Memory Usage:19.1MB / 123.1MB (15.5%)
Connections:101/16384
CPU Load Averages:0.00 / 0.01 / 0.05 (1/5/15 minutes)
Uptime:2 days, 18 hours, 50 minutes
Current Date & Time:16/10/2015 14:06 BST

Dear francisuk.

Could you please execute this command in SSH find / -name overview.* and paste the results here?

Thanks in advance.