Can Gargoyle be used on Belkin?
Moderator: Moderators
-
hypertension
- Posts: 1
- Joined: Sat Apr 24, 2010 11:02 pm
Can Gargoyle be used on Belkin?
I have a few Belkin routers that i use and wondered if Gargoyle could be used on them. One is model # F5D7234-4 v5, would i be able to use gargoyle on it? Thanks for any help.
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Can Gargoyle be used on Belkin?
Only info I can find is on DD-WRT about the chipset and it looks
like that this router only has 2MB flash.
Gargoyle / Open-WRT currently requires at least 4MB flash mem
So no, it doesn't look like it is, or will be, supported.
If someone can figure out how to hack those or maybe flash on
larger flash-ram chips, you might be able to get something working.
like that this router only has 2MB flash.
Gargoyle / Open-WRT currently requires at least 4MB flash mem
So no, it doesn't look like it is, or will be, supported.
If someone can figure out how to hack those or maybe flash on
larger flash-ram chips, you might be able to get something working.
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400