TP-Link 1043nd v2 lan speed issue

[leshqo]

Hi There

I've recently changed my old TP-Link 1043nd v1 to 1043nd v2. On both I have installed Gargoyle 1.6.2. I have big issue with Lan speeds. Lan connections between it's Lan ports are extremly slow (approximately 300KB/s). When I have 2 pc's connected to gigabit switch connected also to 1043nd v2, I have transfers like 60MB/s, but connecting one pc directly to router slower the transfer as I wrote ealier.
I've checked/changed cables/computers without effect. Downloading file from one of this pc's to wifi(n) connected device gives speed 5MB/s. When the speed reaches about 8MB/s suddenly decreases.

What can be the reason?

Don't know if it has something to do, but I'm using exroot

[tapper]

Hi sounds verry strange!
Try and flash the latest ver of 1.7
viewtopic.php?f=14&t=7227

If that dont work then try and flash back to stock latest ver and than back to 1.7

[leshqo]

Ok, so I finally found a solution. The cable between router and switch was broken. "Unfortunatelly" when I connected my old router witch switch it worked correctly so the cable was no suspected by me, but finally I decided to connect new rpiter with another cable and everything started to work correctly I only add that meanwhile I tested also v1.7.1 but not working exroot function is blocker for me, but latest version is quite interesting to try.

Thank's for your help!