First of all,
Thank you for the hard work into this firmware.
Router Info:
WDR3600 v1.5
Gargoyle Version:
1.7.0
Issue:
QOS settings are not retained after various changes. Also, All QOS match criteria/Classification disappears
How to Reproduce problem:
1. Upload Gargoyle 1.7.0 backup settings
2. Uncheck "Manually control target ping time:"
3. Save
Note: If error is not reproduced, change "Total Download Bandwidth:" from 34000 to 31000. Save.
Info about gargoyle backup:
Back up was made directly after a clean install.
Changes are:
1. Router IP set to: 192.168.0.1
2. settings of Wireless (AP)
3. QOS settings
I was unable to reproduce this behaviour on:
Gargoyle Version:1.7.X (Built 20150109-0720 git@da35789)
Model:TP-Link TL-WR1043N/ND v2
My config includes two additional QOS rules for Skype but making the changes described did not wipe the QOS rules. I tried:
Uncheck "Manually control target ping time:"
change "Total Download Bandwidth:"
Changing the value of "Manually control target ping time"
Can you help someone else get Gargoyle up and running? TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
I have now seen similar behaviour. I added a new QOS rule, moved it to the top of the list, and saved settings. The "Please wait while settings are applied" swirl only lasted a couple of seconds, and then ALL of the QOS rules were wiped.
After restoring my config a couple of times, and retrying the change to the QOS rule, I managed to get it to "stick". So this problem appears to be intermittent.
Can you help someone else get Gargoyle up and running? TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
I observed this behaviour; I even tried starting with a clean config (only configuring the wan to get the box working) and added one rule at a time. I observed this behaviour on the first rule added.
I played with 1.7 for some time - and I like it, but fell back to 1.6 because of this one issues (i.e. no qos)
I have not been able to find whether there has been any progress on this bug, which was originally reported in January. Has it been resolved?
TP-Link WDR 4300 - Gargoyle 1.6.2
16 G Extroot / Auto Discovery Privoxy server / Dedicate TOR VLAN / 5G wds
Parkcomm wrote:I have not been able to find whether there has been any progress on this bug, which was originally reported in January. Has it been resolved?
I am almost certain that this issue has been resolved in later builds : I have not read any coments in the forum about this issue with QOS rules not saving properly for some time.
By memory it is probably fixed in the 1.7.1 experimental build on the download page.
I have not personally tested all of these later builds (for unrelated reasons) but I will as soon as I get the chance.
Can you help someone else get Gargoyle up and running? TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E