I've added OpenDNS's servers and selected "Force Clients To Use Router DNS Servers".
Is there anything else that I need to do in order to get OpenDNS working properly with Gargoyle 1.2.1? Thanks.
KC
OpenDNS Configuration for Dummy (meaning me)
Moderator: Moderators
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: OpenDNS Configuration for Dummy (meaning me)
That should work.
However, you would probably have to add other rules to
prevent people from choosing static IP's and their own DNS.
I know I can have those settings, but if I manually assign
a static IP and put my own DNS servers in there, without adding
any blocking rules, then I can still have internet access.
However, you would probably have to add other rules to
prevent people from choosing static IP's and their own DNS.
I know I can have those settings, but if I manually assign
a static IP and put my own DNS servers in there, without adding
any blocking rules, then I can still have internet access.
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: OpenDNS Configuration for Dummy (meaning me)
You may also want to go into the connection/dynamic dns section and configure OpenDNS to be periodically updated with your IP address. Otherwise, if your IP changes, your custom OpenDNS settings will not be used.
Re: OpenDNS Configuration for Dummy (meaning me)
Done. Thanks for the suggestion.Eric wrote:You may also want to go into the connection/dynamic dns section and configure OpenDNS to be periodically updated with your IP address. Otherwise, if your IP changes, your custom OpenDNS settings will not be used.
KC