Install on Slboat WR703N with Barrier Breaker

[Petergunn]

I have a Slboat modded TP-Link WR703N that currently running Barrier Breaker. AFAIK this is just the same as a regular WR703N but with more RAM and Flash. Would it be possible to flash Gargoyle (1.7?) directly on top of this?

Thanks

PG

[Lantis]

Yes. But it will be missing a few things because it thinks it only has 4mb of flash to play with.

[Petergunn]

Thanks. I'll give it a shot (probably at when I have time at the weekend). This is the modded WR730N with 16Mb flash and 64Mb ram.

-PG

[Lantis]

Off the top of my head you'll definitely be missing USB support.

[Petergunn]

Flashed 1.7.1 on my modded WR703n using OpenWRT Luci interface. Flash worked as expected and Gargoyle sees 64Mb RAM and 16Mb Flash.

I would like to set up the router as a 'universal repeater' so that I can connect to an AP and re-serve on a new SSID. wr703n only has one antenna but this was possible on OpenWRT if I used the same channel for both APs.

Am I correct in thinking that Gargoyle doesn't support this?

Thanks

PG

[tapper]

I think that will work in Gargoyle. giv it a try.

[Petergunn]

Yay. It worked. Now I need to figure out how to install OpenVPN and see if I can route the client traffic through the tunnel.

-PG

[Petergunn]

Im probably doing something completely noobish here...

Code: Select all

root@Gargoyle:/# opkg list | grep openvpn
collectd-mod-openvpn - 4.10.8-3 - OpenVPN traffic/compression input plugin
openvpn-easy-rsa - 2013-01-30-2 - Simple shell scripts to manage a Certificate Authority
openvpn-nossl - 2.3.6-2 - Open source VPN solution using plaintext (no SSL)
openvpn-openssl - 2.3.6-2 - Open source VPN solution using OpenSSL
openvpn-polarssl - 2.3.6-2 - Open source VPN solution using PolarSSL
plugin-gargoyle-openvpn - 1.7.1-1 - OpenVPN Support for Gargoyle

Code: Select all

root@Gargoyle:/# opkg install plugin-gargoyle-openvpn
ERROR: Dependency openvpn of package plugin-gargoyle-openvpn cannot be found, try updating your package lists

Whats the recommended way to install Gargoyle OpenVPN support?

Thanks

-PG

[Petergunn]

Bump.

Any ideas? I think the barrier breaker package is called openvpn-openssl. Is there some way I can get the gargoyle package to use that instead?

-pg

[Petergunn]

Bump.

Code: Select all

root@Gargoyle:/# opkg install plugin-gargoyle-openvpn --force-depends

ERROR: Dependency openvpn of package plugin-gargoyle-openvpn cannot be found, try updating your package lists

This does work either. The gargoyle plugin still refuses to install.

-PG