DHCP Server - cannot disable on v1.2

[mdcoll25]

I have the new version , as at 18th March 2010.
After installing , I cannot disable the built in DHCP server.
Also - The new .img file does not work after a reboot. Unit is stuck at Redboot.
Installation is successful with the squash/vlmz combination ok.

Reverting to v1.18 is OK on the DHCP problem.

I suspect this is a bug.

Cheers
Mike

[DoesItMatter]

How did you upgrade the new image file?

I had 1.2.0 already loaded, and downloaded 1.2.1 combined image

Flashed it from the Web GUI, but left it for about 30 minutes,
came back, power-cycled the router, and 1.2.1 was loaded fine.

Atheros devices always take a long time to flash.

I'm going to re-load 1.2.1 here again, and see if I can disable the
DHCP server and will respond back.

[DoesItMatter]

Are you getting this error?

I tried to un-check the DHCP box, and I get the error shown
in the attached image when I hit apply settings.

[mdcoll25]

Yup , that's exactly what I get

[der_Kief]

Exact same problem here.

der_Kief

[Eric]

Thanks for reporting this -- I'm working on the problem now.